Log:
Évaluations - 0, GPA: 0 ( )

Instructions Philips, Modèle 40PFL3008K/12

Fabricant : Philips
Taille : 1.66 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available). Cable installation Select CABLE option and press OK on the remote control. For automatic installation, select YES and press OK. You can also select frequency ranges from this screen. Enter the frequency range manually by using the numeric button. Note: Searching duration will change depending on the selected search step. Satellite installation If you select Satellite option from the Search Type screen, you can set a satellite and watch satellite channels. When you select Satellite installation, Antenna Type menu will be displayed. English - 3 Media browser menu Loop/Shuffle Mode Operation Start playback with and activate TV plays next file and loop the list. Start playback with OK and activate File will be played in a loop (repeat). Start playback with OK/ and activate File will be played in a shuffle. Start playback with OK/ and activate File playback will continue randomly and random playback will continue. Media browser menu Loop/Shuffle Mode Operation Start playback with and activate TV plays next file and loop the list. Start playback with OK and activate File will be played in a loop (repeat). Start playback with OK/ and activate File will be played in a shuffle. Start playback with OK/ and activate File playback will continue randomly and random playback will continue. There are three types of antenna selection. You can select Antenna type as Direct, Unicable or DiSEqC switch by using “ ” or “ ” buttons. Direct: If you have a single receiver and a direct satellite dish, select this antenna type. After selecting Direct, another menu screen will be displayed. Select an available satellite by using cursor left or cursor right, after your selection you have 2 possibilities to continue installation, a full or a quick installation: 1. Press the green button and select “NO” followed by “OK” to perform a full scan and search for all available services on the selected satellite. 2. Press the green button and select “YES” followed by “OK” to load a predefined channel list and confirm with (very quick installation, all main services per country installed). Unicable: If you have multiple receivers and an unicable system, select this antenna type. Press OK to continue. Configure settings by following instructions on the screen. For full or quick installation follow the instructions under “Direct” (alternatively: Copy same text as above here). DiSEqC switch: If you have multiple satellite dishes and a DiSEqC switch, select this antenna type. After selecting DiSEqC switch, another menu screen will be displayed. You can set four DiSEqC options (if available). Press GREEN button to scan all satellites or press YELLOW button to scan only the highlighted satellite. To save and exit press OK button. Play media files from a USB drive You can play photo, music, and movie files stored on a USB disk by connecting it to your TV. Connect a USB disk to one of the USB inputs located on the side of the TV. Pressing the“ ” button while in the Media Browser mode will access the Picture, Sound and Settings menu options. Pressing the “ ” button again will exit from this screen. You can set your Media Browser preferences by using the Settings Menu. IMPORTANT! Back up your files before making any connections to the TV. The manufacturer will not be responsible for any file damage or data loss. Certain types of USB devices, for example, MP3 players or USB hard disk drives/memory sticks may not be compatible with this TV. Recording a program Please format your USB flash drive / device before first use. To do this; press OK while Format Disk is highlighted on screen and enter your pin number. The factory default pin number is “0000”. • To record a program, connect a USB flash drive while your TV is turned off. Recording function will be available once your TV is switched back on. • The connected USB flash drives / devices must have at least 1 gigabytes (1gb) of free space and USB 2.0 compatibility. An error message will be displayed if these conditions are not met. • By default, recorded programs are stored on the connected USB flash drive / device. You may store these programs on a computer as well, although you can play them only on your TV. • The TV supports FAT32 and NTFS disk formatting but recording will not be available with NTFS formatted disks. Timeshift recording Press PAUSE while watching a broadcast to activate timeshifting mode. • In timeshifting mode, the program is paused and simultaneously recorded to the connected USB disk. • Press (PLAY) button again to resume the paused program from where you stopped. Press the STOP button to stop timeshift recording and return to the live broadcast. Note: Time shift cannot be used while in radio mode. Note:You cannot use the time shift fast reverse feature before advancing the playback with the fast forward option. English - 4 Instant recor...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories