Log:
Évaluations - 0, GPA: 0 ( )

Instructions Philips, Modèle 32PFL3028H/12

Fabricant : Philips
Taille : 2.3 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


TV Menu Features and Functions 10-11 Settings Menu Contents 11 Install and Retune Menu Contents 12 General TV Operation 12 Using the Channel List 12 Electronic Programme Guide (EPG) 12 Troubleshooting & Tips 13 AV and HDMI Signal Compatibility 14 PC Typical Display Modes 14 If there is lightning or storms, or if the TV is not going to be used for a while (e.g. if going away on holiday), disconnect the TV set from the mains. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note : Follow the on screen instructions for operating the related features. IMPORTANT - Please read these instructions fully before installing or operating WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised. • For ventilation purposes, leave a free space of at least 10 cm all around the set. • Do not block ventilation holes. • Do not place the TV on sloping or unstable surfaces, the TV may tip over. • Use this device in moderate climates. • The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. A damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel. • Do not use this TV in a humid or damp place. Do not expose the TV to liquids. If any liquid falls into the cabinet unplug the TV and have it checked by qualified personnel before operating it any further. • Do not expose the TV to direct sunlight or other heat sources. • The TV should not be placed near to open flames or sources of intense heat such as an electric heater. • Excessive sound pressure from earphones and headphones can cause hearing loss. • Ensure that no open flame sources, such as lit candles, are placed on top of the TV. • To prevent injury, this TV must be securely attached to the wall in accordance with the installation instructions (if the option is available). • Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performance of your product. Take care not to scratch the screen with fingernails or other hard objects. • Before cleaning, unplug the TV from the wall socket. Only use a soft, dry cloth while cleaning. Warning Serious injury or death risk Risk of electric shock Dangerous voltage risk Caution Injury or property damage risk Important Correctly the system operate Notice Additional notes marked English - 1 English - 2 - Installing the Stand & Uninstalling the Stand Please read the following information carefully before attaching the stand to your new Television. 1. Before fitting the stand, ensure that the TV is unplugged from its power source. Place the TV on a soft, stable and flat surface, facing down. Place the Stand on the stand mounting pattern on the rear side of the TV. Ensure the Stand is placed correctly and that you can see the screw holes on the back of the Television. Insert the four screws provided and tighten them gently until the stand is properly fitted (fig.1). Please read the following information carefully before detaching the stand of your Television. 2. Before detaching the stand, ensure that the TV is unplugged from its power source. Place the Television on a soft, stable and flat surface, facing down. Unscrew gently the four screws that attach the foot assembly and remove the screws when they are completely unscrewed. Remove the stand gently from the panel (fig.2). fig.1 fig.2 Getting Started Getting Started Notifications & Features & Accessories Environmental Information This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode. The Power Save Mode settings can be found in the ‘Picture’ section of the Main Menu. Note that some picture settings will be unavailable to be changed. If Picture Off is selected, “Screen will be off in 3 seconds.” message will be displayed. Select PROCEED and press OK to continue. The screen will be off immediately. When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption. Standby Notifications 1) If the TV does not receive any input signal (e.g. from an aerial or HDMI source) for 5 minutes, the TV will go into stan...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories