Évaluations - , GPA: ( )

Instructions Samsung, Modèle PS50B550T4W

Fabricant : Samsung
Taille : 9.44 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Par ce dispositif a également d'autres instructions :

TV - PS50B550T4W (11.19 mb)

TV - PS50B550T4W (278.76 kb)

TV - PS50B550T4W (293.23 kb)

TV - PS50B550T4W (34.06 mb)

Voir tous

TV - PS50B550T4W (968.52 kb)

Incorrect or loose connections may cause Colour problems or the screen will be blank. Adjust• Picture options in the TV menu (Picture Mode, Colour, Brightness, Sharpness). Poor Colour or brightness. Adjust• Energy Saving option in Setup menu. Try picture reset to view the default picture setting. • (Go to MENU > Picture > Picture Reset) Dotted line on the edge of screen. If picture size is set to• Just scan, change to 16:9. Change cable/Set top box resolution.• Picture is black and white with AV (Composite) input only. Connect video cable (Yellow) to Green jack of component input 1 of the TV. • Picture freezes or is distorted when changing channels or picture isdelayed. If connected with cable box, please try to reset cable box. (reconnect AC cord and • wait until cable box reboots. It may take up to 20 minutes) Set output resolution of cable box to 1080i or 720p• Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating. * Go to MENU > Support > Self Diagnosis > Sound Test If the audio is OK, the sound problem may caused by the source or signal. No sound or sound is too low at maximum volume. Please check the volume of device (Cable/Sat Box, DVD, Blu-ray etc) connected to• your TV. Then, adjust the TV volume accordingly. Picture is good but no sound. Set the• Speaker Select option to TV speaker in the sound menu. Make sure audio cables from an external device are connected to correct audio input• jacks on the TV. Check connected device's audio output option.• Ex) You may need to change your cable box' audio option to HDMI when you have HDMI connected to your TV. If you are using a DVI to HDMI cable, a separate audio cable is required.• Deactivate SRS function if you are setting the volume over 30 value.• Remove plug from headphone jack (if available on your TV). • Noise from speaker. Check cable connections. Make sure a video cable is not connected to an audio input.• For Antenna/Cable connection, check signal strength. Low signal level may cause • sound distortion. English - 43 Problem Possible Solution Problem Possible Solution No Picture, No Video TV won't turn on. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. • Make sure the wall outlet is working.• Try pressing the Power button on the TV to make sure the remote is working properly. • If the TV turns on, it may be caused by Remote Control. To fix the Remote problem, refer to "Remote control does not work" below. TV turns off automatically. Check if the• Sleep Timer is set to On in the Setup menu. If connected the TV to your PC, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV. • If there is no signal for about 10 ~ 15 minutes with Antenna/Cable connection, the TV • will turn off. No picture/Video. Check cable connections. (remove and reconnect all cables of TV and external • devices) Set your external device's (Cable/Set top Box, DVD, Blu-ray etc) video output to• match the connections to the TV input. For example, external device's output : HDMI , TV's input : HDMI. Make sure your connected device is powered on.• Make sure to select the TV's correct source by pressing the • SOURCE button on the remote control. Reboot the connected device by reconnecting the device’s power cable. • RF (Cable/Antenna) Connection Cannot receive all channels. Picture is distorted : macroblock,small block,dots,pixelization. • Make sure Antenna cable is connected securely. • Please try Plug & Play to add available channels to the channel list. Go to MENU > Setup > Plug & Play and wait for all avaiable channels are stored. • Verify Antenna is positioned correctly. • Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies. • Low signal level can cause picture distortion. This is not a TV issue. PC Connection “Not Supported Mode” message. Set your PC's output resolution and frequency so it matches the resolutions supported• by the TV. PC is always shown on source list evenif not connected. This is normal; PC is always shown on the source list even though a PC is not• connected. Video is OK but there is no audio with HDMI connection. Check the audio output setting on your PC.• Others Picture is not shown in full screen. Remote control does not work. • Black bars on each side will be shown on HD channels when displaying upscaled SD (4:3) contents. • Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV. • Adjust picture size option on your external device or TV to full screen. • Replace the remote control batteries with correct polarity (+ -). • Clean the transmission window located on the top of the remote. • Try pointing the remote directly at the TV from 5~6 feet away. English - 44 Problem Possible Solution Plasma TV is making humming noise. Plasma TVs typically make a soft humming sound. This is normal. It’s caus...