Évaluations - 1, GPA: 1 ( )

Fabricant : Samsung Taille : 20.47 mb Nom Fichier : Langue d'enseignement:

This image retention is also known as “screen burn”. To avoid such image retention, refer to page 15 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. • Heat on the top of the Plasma TV The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. • The product is making a “cracking” noise. A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. • Cell Defects The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. • Avoid operating the TV at temperatures below 41°F (5°C) • A still image displayed too long may cause permanent damage to the PDP Panel. Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty. • After-images on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time. • Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. English Contents Getting Started 4 Connections 8 Basic Features 11 Advanced Features 24 Other Information 47 4 Accessories 5 Viewing the Control Panel 6 Viewing the Remote Control 7 Connecting to an Antenna 7 Plug & Play (Initial Setup) 8 Connecting to an AV Device 9 Connecting to an Audio Device 10 Changing the Input Source 11 How to Navigate Menus 11 Using the INFO button (Now & Next guide) 11 Planning Your Viewing 13 Channel Menu 15 Picture Menu 18 Sound Menu 20 Setup Menu 22 Support Menu 24 Connecting to a PC 25 Network Connection 32 Media Play 39 Anynet+ 42 Internet@TV 45 AllShare 47 Analogue Channel Teletext Feature 48 Assembling the Cables 48 Installing the Wall Mount 50 Securing the Installation Space 50 Securing the TV to the wall 51 Troubleshooting 54 Specifications 56 Index ENGLISH TOOLS Check the Symbol! t This function can be used by pressing the TOOLS button on the remote control. Note One-Touch Button • An administration fee may be charged if either – (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual) – (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual). • The amount of such administration charge willbe advised to you before any work or home visitis carried out. English 3 Getting Started Accessories . Please make sure the following items are included with your PDP T V. If any items are missing, contact your dealer. . The items’ colours and shapes may vary depending on the models. . Cables not included in the package contents can be purchased separately. • Remote Control & Batteries (AAA x 2) • Cleaning Cloth • Owner’s Instructions • Warranty Card / Safety Guide (Not available in some locations) (M4 X L10) • Blanking Bracket • Holder-Ring (4EA) (58 inch model only) • Holder-Wire stand • Cable Tie • Holder-Wire (3EA) • SCART Adapter • Component Adapter • AV Adapter • Ferrite Core (2EA) • Ferrite Core (1EA) . Ferrite Core: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure. . For best cable connection to thi Distance between the ferrite core and one end of the cord put into the TV set. AyA : below 50 mm s product, be sure to use cables wi th a maximum thickness as below: • Maximum thickness - 0.55 inches (14mm) English Viewing the Control Panel Viewing the Control Panel . The product colour and shape may vary depending on the model. Power Indicator Speakers Remote control sensor Remote control sensor SOURCEEMENU YzPower Indicator P(Power) Aim the remote control towards this spot on the TV. Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. Displays an on-screen menu, the OSD (on screen display), of your TV’s features. Adjusts the volume. In the OSD, use the Ybuttons as you would use the < and > buttons...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :