Évaluations - 2, GPA: 3.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use. After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode. Selecting input source Press repeatedly until the desired input symbol of the source appears on the TV screen. Back to the channel last watched Press to watch the last channel selected (watched for at least 5 seconds). Displaying the menu system GB Press to display the menu on the TV screen. Press again to remove the menu display from the TV screen. Menu selection •When MENU is switched on: Scroll Up Scroll Down Previous menu or selection Next menu or selection OK confirms your selection •When MENU is switched off: OK Shows a channel overview. Press or to select the channel and then, press again the OK button to watch the selected channel. Selecting Screen format Press to view programmes in 16:9 mode. Press again to return to 4:3 mode. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to "“Teletext” section of this instruction manual. 5 Overview Overview of TV Buttons On/Off switch Auto Start Up Button Volume control buttons Video Input jack Press on the mark on the front of the TV to reveal the front connectors. Headphone jack Selecting Input source Audio Input jack Standby indicator Programme Up or Down Buttons (Select TV channels) Inserting Batteries into the Remote Control Make sure to insert the supplied batteries using the correct polarities. Always remember you dispose of used batteries in an environmental friendly way. Overview-Installation Connecting an Indoor Aerial (only for KV-14LT1U) For a better reception we recommend you connect an external aerial. However, where an external aerial is not available and your local UHF signal is strong you can connect the supplied loop aerial as follows: 1 Insert the loop aerial into the opening on top of the set until it clicks. 2 Connect the aerial connector to the aerial socket on the rear of the set. 3 After turning on the TV, adjust the aerial for optimum reception. GB Connecting an Outdoor Aerial and VCR Connecting cables are not supplied For more details of VCR connection, please refer to the section “Connecting Optional Equipment” of this instruction manual. or VCR Scart lead is optional. OUT IN 7 Installation Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language menu, change or repeat the tuning (e.g. when you move house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in the (Set Up). For more information, refer to the “Menu Guide” section of this instruction manual. You can also do that by pressing the Auto Start Up Button on the TV set. 1 Connect the TV plug to the mains socket (220-240V AC, 50Hz) The first time the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you press this button, a Language menu displays automatically on the TV screen. 2 Press the or button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language. 3 The Auto Tuning menu appears on the screen. Press the OK button to select Yes. 4 A new menu appears on the screen asking you to check that the aerial is connected. Ensure the aerial is connected and then press the OK button to start the automatic tuning. The TV starts to automatically search and store all available channels (TV Broadcast) for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed. Language Select Language: English Espanol Francais Italiano Magyar Nederlands OK Do you want to start automatic tuning? Yes No OK K K Please confirm that aerial is connected Confirm OK Programme: 01 Channel: C21 Auto Tuning Searching... K continued... First Time Operation 5 After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. a) If you do not wish to change the channel order, go to step 6. b) If you wish to change the channel order: 1 Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press . 3 Repeat steps b)1 and b)2 if you wish to change ...
Ce manuel est également adapté pour les modèles :TV - KV-14LT1U (2.66 mb)