|
Photos et spécifications Sony KDL-40S5650 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Retain this manual for future reference. 3 GB Start-up Guide Start-up Guide Checking the accessories Remote RM-ED017 (1) Mains lead (Type C-6) (1) (except for 37/32/26 inches) Size AA batteries (R6 type) (2) Stand (1) Screws for stand (4) To insert batteries into the remote Push and slide to open. ~ • Observe the correct polarity when inserting batteries. • Do not use different types of batteries together or mix old and new batteries. • Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority. • Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 2: Attaching the stand Follow the assembling steps required to place on a TV stand. 1 Open the carton box and take out the stand and the screws. 2 Place the TV set on the stand. Take care not to interfere with cables. 3 Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws. ~ • If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm). 4 GB 3:3: * Except for KDL-40/37/32P36xx. ~ • This product has been tested and found to compliant with the limits set out in the EMC Directive for using connection cables not longer than 3 meters (9.8 feet). Connecting an aerial/cable* only Terrestrial signal or cable* Coaxial cable Connecting an aerial/cable*/VCR/DVD recorder with SCART AV1AV2Scart lead VCR/DVD recorder Coaxial cable Coaxial cable Terrestrial signal orcable* ~ • AV1 outputs available only for analogue TV. • AV2 outputs to the current screen (except PC, HDMI, Component). Connecting an aerial/cable*/VCR/DVD recorder with HDMI Start-up HDMI cable Coaxial cable Coaxial cable VCR/DVD recorder Terrestrial signal or cable* 4: Preventing the TV from toppling over 2 1 3 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. Continued 5 GB 2 2 3 Tie the wood screw and the machine screw with a strong cord. z • An optional Sony support belt kit is used to secure the TV. Contact your nearest Sony Service Centre to purchase a kit. Have your TV model name ready for reference. 5: Bundling the cables You can bundle the connecting cables as illustrated below. ~ •Do not bundle the mains lead with other connecting cables. 6: Selecting the language, country/region and location RETURNTOOLSGUIDEMENUAUDIOSCENEANALOGDIGITAL 3,4,5 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the side of the TV. When you turn on the TV for the first time, the Language menu appears on the screen. ~ • When you turn on the TV, the power indicator light up in green. 3 Press F/f to select the language displayed on the menu screens, then press . Select: Confirm: Language Country Location Auto Start-up 6 GB 4 Press F/f to select the country/region in which you will operate the TV, then press . 4 Press F/f to select the country/region in which you will operate the TV, then press . Select:Back: Confirm: Language Country Location - United Kingdom Ireland Nederland Belgie/Belgique Luxembourg France Italia Auto Start-up If the country/region which you want to use on the TV does not appear in the list, select “-” instead of a country/region. 5 Press F/f to select the location type in which you will operate the TV, then press . Language Country Location Home Shop Select:Back: Confirm: Auto Start-up In Shop mode, some settings will be periodically reset for Shop usage. This option selects the initial picture mode appropriate for the typical lighting condition in these environments. 7: Auto-tuning the TV 1 Press . Back: Start: Do you want to start Auto Tuning? Auto Tuning 2 Press F/f to select “Antenna” or “Cable*”, then press . If you select “Cable*”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 8). The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial/cable* connections and press to start auto-tuning again. * Except for KDL-40/37/32P36xx. 3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 25). If you do not change the order in which the analogue channels are stored on the TV, press MENU to go to next step. ~ • This step will not appear if any analogue channel is found. Start-up Continued 7 GB 4 4 . If you press “Yes”, the “Eco” settings are changed to recommended values to reduce power consumption. Do you want to use the Eco Preset? Choosing "YES" will reduce power consumption. Power Saving Idle TV Standby PC Power Management Reduce 3 h On Yes No Eco Preset The TV has now tuned in all the...
Ce manuel est également adapté pour les modèles :TV - KDL-26P5550 (706.35 kb)
TV - KDL-32P3550 (706.34 kb)
TV - KDL-32P3600 (706.34 kb)
TV - KDL-32P5550 (706.34 kb)