Évaluations - 3, GPA: 5
(
)
)
|
Par ce dispositif a également d'autres instructions :
TV - KDL-40W5800 (11.97 mb)
TV - KDL-40W5800 (12.52 mb)
Facilité d'utilisation
Then, press to select the correct character. 3 Repeat step 2 until you finish entering the name. 96/119 Analogue Set-up 4 Press to exit the labeling procedure. Intelligent Picture • On with Indicator: Automatically reduces the picture noise. The signal level bar is displayed when the channel is changed or the display is changed from an input screen to a TV programme. • On: Automatically reduces the picture noise. • Off: Turns off the “Intelligent Picture” feature. Manual Programme Preset To preset a channel, press PROG +/– to select the programme number, before selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You cannot select a programme number that is set to “Skip” (99). • Programme/System/Channel: Allows you to preset programme channels manually. 1 Press to select “Programme”, then press . 2 Press to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press . 3 Press to select “System”, then press . 4 Press to select one of the following TV broadcast systems, then press . B/G: For western European countries/areas I: For the United Kingdom D/K: For eastern European countries/areas L: For France 97/119 Analogue Set-up 5 Press to select “Channel”, then press . 6 Press to select “S” (for cable channels) or “C” (for terrestrial channels), then press . 7 Tune the channels as follows: If you do not know the channel number (Frequency): Press to search for the next available channel. The search stops when a channel is found. To continue searching, press . If you know the channel number (Frequency): Press the number buttons to enter the channel number of the broadcast you want to tune, or the channel number of your VCR. 8 Press to jump to “Confirm”, then press . Repeat the above procedure to preset other channels manually. • Label: Assigns a name of your choice to the selected channel. This name appears briefly on the screen when you select the channel. To input characters, follow steps 2 to 4 in “Programme Labels” (96). • AFT: Allows you to fine-tune the selected channel manually if you feel that a slight tuning adjustment may improve picture quality. When “On” is selected, fine tuning adjustments are made automatically. 98/119 Analogue Set-up • Confirm: Saves changes you have made to the “Manual Programme Preset” settings. • Audio Filter: Improves the sound of individual channels when distortion occurs in mono broadcasts (normally set to “Off”). • You cannot receive stereo or dual sound when “Low” or “High” is selected. • Skip: Skips unused analogue channels when you press PROG +/– to select channels. To select channels you have programmed to skip, use the corresponding number buttons. • LNA: Improves the picture quality of the channel (noisy picture) when the broadcast signal is very weak. 99/119 Digital Set-up Subtitle Set-up • Subtitle Setting: When set to “For Hard Of Hearing”, visual aids for the hearing impaired are displayed with the subtitles (when such visual aids are ...
Ce manuel est également adapté pour les modèles :TV - KDL-46V5800 (11.98 mb)
TV - KDL-46V5810 (11.98 mb)
TV - KDL-52V5800 (11.98 mb)
TV - KDL-52V5810 (11.98 mb)