Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
TV - 22LN450U (5.29 mb)
TV - 22LN450U (4.04 mb)
TV - 22LN450U (4.06 mb)
Facilité d'utilisation
inst alled on the TV. The contents of this guide are subject to change without prior notice for quality improvement. ..To.view.programme.informationPress.INFO.button. Displays.information.on.current.programme.and/or.current.time,.etc.. ..To.view.programme.informationPress.INFO.button. Displays.information.on.current.programme.and/or.current.time,.etc.. . To set favourite programmes SETTINGS . SETUP . Programme Edit 1 Select the channel you want. 2 Press the FAV button to select Favourite Group and then OK. . You can check your favourite channels by pressing the LIST button on the remote control. . To use Favourite Press the FAV button. You can only view the channels you set as favourites. Press GUIDE button. [In Digital mode only] Obtains information about programmes and airtime. Checks the broadcasting [In Digital mode only] Obtains information about programmes and airtime. Checks the broadcasting time of the desired programme and schedule viewing. . Automatically Setting Up Programme SETTINGS . SETUP . Auto Tuning Automatically tunes the programmes. 1 Select Country where the TV is used. Programme settings change depending on the country you choose. 2 Initiate Auto Tuning. 3 Select Input Source of your choice. 4 Set Auto Tuning following screen instructions. . If Input Source is not connected properly, programme registration may not work. . Auto Tuning only finds programmes that are currently broadcasting. . If Lock System is turned on, a pop-up window will appear asking for password. . Cable DTV Setting option When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as “default”. • Frequency : Enter a user-defined frequency. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). • Network ID : Unique identifier allocated for each user. • Start Frequency : Enter a user-defined start frequency range. • End Frequency : Enter a user-defined end frequency range. . Satellite Setting Option • Satellite : Select your desired Satellite. • LNB Frequency : [Depending on country] Select one value from 9750/10600, 9750/10750, 9750, 10600,10750, 5150, MDU1, MDU2, MDU3, MDU4, MDU5. If you select 9750/10600, 9750/10750(MHz), 22KHz Tone is disabled. If you cannot find the LNB frequency value from the list, select User and manually enter the frequency. • Transponder : Select the transponder you want to tune. • 22KHz Tone : When using 22KHz Tone switch, select A or B. If you use 22KHz Tone, Unicable and Motor Type are disabled. • LNB Power : To enable the power supply for the LNB, select On. If you select Off, Motor Type is disabled. • DiSEqC : When using DiSEqC, select one option from A~D/ToneA~B. If you use DiSEqC, Unicable and Motor Type are disabled. • Unicable Settings : Select On to use Unicable and set the Unicable in the Unicable Setting menu. When Unicable is enabled, 22KHz Tone, DiSEqC, Motor Type are disabled. • Motor Type : Select Motor Type to use Motor and set the Motor in the Motor Setting menu. When Motor is enabled, 22KHz Tone, DiSEqC, Unicable are disabled. . If you set satellite to others, you must add a transponder using Manual Tuning. . When selecting 22KHz Tone and DiSEqc, you must connect them in the same position as displayed on the OSD. . If you delete a Satellite, all programmes stored in the Satellite are deleted. . Motor Setting Option • DiSEqC 1.2 : Control motor to change satellite dish position. Drive Direction : Select the direction in which you want to move the motor. Drive Mode : Two modes are available: Step and Continuous. - Step: The motor moves based on the value you enter (from 1 to 128). - Continuous: The motor moves continuously until you press the Stop. Test TP : Select the test TP you want to tune. Set Limit : Set the motor movement to east or west to have the motor move only within the direction set. -On: You can limit the movement to the current direction by selecting the West/East. -Off: You can cancel the limit you set. Go To Zero: You can move the motor to Zero Store: You can save the motor’s current direction. • USALS : Set your current location(Longitude/Latitude). . Cable DTV Se...
Ce manuel est également adapté pour les modèles :TV - 22LN457U (5.29 mb)
TV - 26LN450U (5.29 mb)
TV - 26LN457U (5.29 mb)
TV - 26LN4505 (5.29 mb)