Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
3D GLASSES AG-S350 OWNER’S MANUAL Please read this manual carefully before operating and keep it for future reference. 3D GLASSES AG-S350 P/NO: SAC34026212 (1202-REV03) 2 ENGLISH ! NOTE . The pictures shown in this manual may differ from the actual appearances. 3D Glasses Nose Pad 8-pin mini USB cable Manual CD Quick Start Guide Pouches 3D Glasses’ Lenses Power Button LED indicator USB port (charging port) 8-pin mini USB cable FEATURES AG-S350 are 3D glasses that use RF(2.4GHz) wireless communication. ¦ If the device is connected to the TV that supports the RF glasses, you can enjoy the vivid 3D images. ¦ You can enjoy movies or pictures made as 3D. ¦ If you are using your 3D glasses for the fi rst time, make sure that the battery is fully charged. ACCESSORIES PART NAMES Pairing 3D Glasses with Your 3D TV *1 Recommended pairing distance (10cm) How to pair the glasses How to re-pair the glasses ........ 1. Turn the 3D TV on and switch the TV to 3D mode. 1. Press and hold the power button on the 3D glasses for more than 8 seconds, the green LED light should come on. 2. Place your 3D glasses within the recommended pairing distance and turn them on. 2. The green LED light will blink three times and then 3D glasses are ready to pair. 3. During pairing, the red and green LED lights will blink alternately. 3. Turn the TV on and switch to 3D mode. 4. When the pairing is complete, the LED light goes off and the 3D glasses start working. 4. Place your 3D glasses within the recommended pairing distance and turn them on. 5. The 3D glasses will not need to be paired with the same 3D TV again. 5. During pairing, the red and green LED lights will blink alternately. 6. When the pairing is complete, the LED light goes off and pairing with the second 3D TV is complete. Nose Pad Pairing means establishing a wireless connection between the 3D TV and 3D glasses. If there is more than one TV in range, please place the 3D glasses within 10 cm of the 3D TV you want to pair the glasses with. The 3D glasses will pair with the 3D TV which has the strongest wireless signal. *1 ! NOTE . The device recognizes the unique ID of the TV to which it is connected. Thus, IDs of other TVs are not recognized by the device. If you wish to re-connect the device to other TVs, please see “How to re-connect the glasses”. 3 CHARGING THE GLASSES 1 Connect the USB port located under the power button on the glasses to the USB port of the TV or PC using the supplied 8-pin mini USB cable as shown by the fi gure. 2 Charge the glasses until the LED is green. The glasses will fully charge in about 1 hours 50 minute. 3 Battery life and charging time . 5 min charge : Approximately 7 hours . 30 min charge : Approximately 40 hours . Battery life may vary depending on the user’s environment. HOW TO WEAR THE 3D GLASSES ENGLISH Ex.) AG-S350 CAUTION . Do not insert the supplied 8-pin mini USB cable in the reverse direction. Otherwise, this may cause damage to the product. ! NOTE . While charging: The LED is red. . When charging is complete: The LED is green. . When the battery is discharged: The Red LED blinks for 1 minute and turns off automatically. . The 3D glasses can still be used while charging via a USB device. CAUTION . If you use a USB cable other the one (8-pin mini USB) supplied with the product, the product may be damaged. . This equipment shall be powered with USB 2.0 or higher. . Avoid twisting or dropping the 3D glasses as this may cause damage or break them. Pull the nose pad in the direction shown by the arrow as shown in the image. Be careful not to twist or lift the nose pad as this can cause damage. Using 3D glasses may not be convenient for users wearing regular glasses. Adjusting the nose pad can improve your viewing comfort. USING 3D GLASSES Button Operation LED Indication Power On Press and hold the power button for 1 or 2 seconds. The red LED blinks once. Power Off Press and hold down the Power button (1 second ~2 second) The red LED blinks three times. Auto Off*1 The device is automatically switched off if there is no 3D signal for more than one minute. The red LED blinks three times. Battery(Lithium polymer) discharge - If the battery is discharged, the red LED blinks for 1 minute and turns off automatically. * When charging is completed, the LED is lit green. How to re-connect the glasses Press the power button for over eight seconds. Release the button when the green LED light turns on. Then, you will see the green light blink three times before the device is switched off. If you switch the power on again, the glasses will be connected to the TV with the strongest signal. The Auto Off function automatically switches the power off when the glasses loose the signal from the TV. This may occur when the distance or angle between the device and the TV are out of range; when there is a barrier between the two devices; or when the device is switched from 3D to 2D mode. *1 ! NOTE . Follow the instructions in reverse order to put the no...