Évaluations - 2, GPA: 5 ( )

Fabricant : Sony Taille : 6.97 mb Nom Fichier : 4078836421.pdf Langue d'enseignement:

4 To return to the normal TV picture, press the button on the remote control. Optional Connections 29 Optional Connections Smartlink Smartlink is a direct link between the set and a VCR. Rear For Smartlink you need: • A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic. Megalogic is a trademark of Grundig Corporation. EasyLink is a trademark of Philips Corporation. • A fully-wired 21 pin SCART cable to connect your VCR to the Scart connector :2/q2 (SMARTLINK) on the rear of the set. The features of Smartlink are: • Tuning information such as the channel overview are downloaded from the set to the VCR. • Direct recording: While watching TV you need to press just one button on the VCR to record this programme. • Automatically switching on: With the set in standby mode, pressing the “Play z” button on your VCR automatically switches the TV on. If you have connected a decoder to a VCR which supports Smartlink feature, select the menu “Further Programme Preset” in the (Manual Set Up) menu and select DECODER AV2 to each coded channel. For more details, please refer to the section "Using the Further Programme Preset function" of this instruction manual. For more information on Smartlink, please refer to the Instruction Manual of your VCR. VCR Decoder Remote Control of other Sony Equipment Using the buttons underneath the cover of the remote control you can control other Sony equipment. 1 Open the cover of the Remote Control. 2 Set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1 Beta VCR VTR 2 8 mm VCR VTR 3 VHS VCR VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000) DVD Digital Video Disk 3 Use the buttons underneath the cover on the remote control to operate the equipment. VTR 1 2 3 4 DVD • If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on this set Remote Control. • If the equipment does not have a certain function, the corresponding button on the remote control will not work. VIDEO TV VTR 1 2 3 4 DVD CH CH Optional Connections Additional Information Optimum Viewing Area For the best picture quality, try to position the set so that you can view the screen from within the areas shown below. Horizontal viewing area GB (Optimum viewing position) 65. 2 m and more 65. Vertical viewing area (Optimum viewing position) 2 m and more 30. 30. Additional Information 31 Additional Information Replacing the Lamp When the lamp becomes dark or the picture colour is not normal or the lamp indicator on the set flashes, replace with a new lamp. • Use the lamp XL-2000E for replacement. If you use another lamp, it may cause damage to the set. • Do not remove the lamp except when replacing it. • Before replacing the lamp, turn off the power and disconnect the power cord. • Replace the lamp after it becomes cool. The front glass of the lamp remains 1...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :