Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
NO USERSER-VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A SA 1965 SA 1966 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. ..............................................................For U.S.A •• Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, i.e., in strict accordance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 1 5 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. .......................................................... For CANADA .. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. The serial number of this product may be found on the bottom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No._ Serial No._ WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - 1 - MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS © © (8> -2- (1) Mounting Holes 4-5/16’ (4-00) (2) Pan Limit Stops Adjustable panning angle: 10° - 340° (3) Tilt Limit Stops Adjustable tilting angle: Up: 0° - 45°, Down: 0° -45° (4) Camera Housing Mounting Holes 4-03/16” (4-05) (5) Camera Guide Pin (6) Camera Mounting Screw Standard Photographic Pan/Tilt head Screw (U 1/4”-20UNC) (7) Mounting Plate (8) Camera Cables Those connectors are connected with the Video Output and Gen Lock Input of the camera. (9) Camera Power Cables (10) Cover Screws (11) Cover (12) Video Output Terminal (VIDEO) This terminal is connected with the video input of the Receiver WV-RC100. (13) External Sync Input Terminal (EXT SYNC) This terminal is connected with the external sync generator. (14) Cable Clamp (15) Control Connector - 1 (8 pins) 8 7 6 5 4 3 2 1 1: Camera 2: No Connection 3: No Connection 4: No Connection 5: AC Common 6: AC Common 7: AC Common 8: Ground (16) Control Connector - 2 (10 pins) 10 g 8 7 6 5 4 3 2 1 1 LEFT 2 RIGHT 3 Up 4 Down 5 No Conn...
Vidéo - WV7230D (249.42 kb)
TV - WV-7230D (249.4 kb)