Évaluations - 2, GPA: 3.5 ( )

Fabricant : Omnimount Taille : 23.05 kb Nom Fichier : 1501186_PM_EN.pdf Langue d'enseignement:

Connect the antenna cable/wires from inside the wall to the rear connectors on the plate, then retighten the screws. Warning: Be sure the exposed portions of the cables/wires do not touch each other. 6. Use the two supplied short screws to secure the plate to the center holes of the brackets. 7. Use a flat-bladed screwdriver to loosen the screws at the back of the supplied three-prong cable plug. Connect the 300-ohm antenna wire from the audio and video outputs of the TV (or the left and right channels of the FM radio) to the plug, then retighten the screws. 8. Insert the plug into the wall plate’s jack. Printed in Taiwan 12A98...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :