Log:
Évaluations - 2, GPA: 3.5 ( )

Instructions PYLE Audio, Modèle PWLB805

Fabricant : PYLE Audio
Taille : 250.49 kb
Nom Fichier : PWLB805.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


I, mount the part-a to the back of the LCD . First determine the right holes,which should be level to each other, on the part-a according to the holes in the back of the LCD. Mount the part-a to the back of the LCD by 4 bolts and washers (D). A,B,C,D Fig I Carefully: Don't force the bolt to LCD hole, avoiding damage to people and instrument. Don't use electronics drill to fasten screw. Step 2:Mount the part-b to the wall.(Wood stud. Brick, Solid Concrete and Masonry wall mo-unting options are provided below) Wood stud mounting First determine the required position in the wall.Mark 4 locations at the wall according to the holes in the Wall Plate(2), according to the Fig 2a. Then pre-drill 50mm (at least) deep hole with a 3mm drill bit. Fix the Wall Plate(2) to the wall by bolt (F) , as the Fig 2b shows . Please note the hooks in the Wall Plate(2) is up. Brick, Solid Concrete and Masonry wall mounting After determine the required position in the wall, mark 4 locations at the wall according to the holes in the Wall Plate(2), then pre-drill 50mm (at least) deep hole with a I I mm drill bit at the position of marks. Insert the Wall anchor cover to every hole. Last fix the Wall Plate(2) to the wall by bolt (F).Please note the hooks in the Wall Plate(2) is up. Step 3 mount the LCD display to the part b in the wall Lift the Monitor Plate against to the Wall Plate(2) with hole to hole, and according to the Fig 3a.Then slide the part a to the slot of the part b,as the Fig 3b shows.Then tighten the safety bolt....


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories