Évaluations - , GPA: ( )

Instructions PYLE Audio, Modèle PSWLE07

Fabricant : PYLE Audio
Taille : 194.23 kb
Nom Fichier : PSWLE07.pdf

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Then swing the screen down. Once the screen is settled, pull down the Supportable lever, so thatyoucaninsert the cable. NOTE: Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment. TV connection block Thankyou for choosing our product Pyle Audio I 600 63rd st, Brooklyn, NX I I 204 (7 18)236-8000 . _ A Warning_ This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children ! I .Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface mu st be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced. 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. -4- Mi' PyLE Honie INSTALLATION GUIDE Item No.:PSWLE07 • TV Size Range: 23" ~46" • Maximum Weight Capacity: 40kg/88lbs • VESA:100x100-400x400 pyleaudio. com -^CAUTION - This product was designed to be installed on wood stud walls and solid concrete walls. Before installing make sure the supporting surface will sup port the combined load of the equipment and hardware. Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Hardware Kit: Wall plate TV connection block * Bubble level Supportable block Supportable lever 12 3 4 A.C.E.G B,D,F,H I \ H.L.t.U D, I Î' ID Qty Description 1 2 Long bolt 2 2 Long bolt washer 3 2 Wall anchor 4 1 Box wrench A 2 M4x 1 5mm bolt B 2 M4x 1 6mm bolt C 2 M5 x 15mm bolt D 2 M5 x 16mm bolt E 2 M6x 15mm bolt F 2 M6x 16mm bolt G 2 M8x20mm bolt H 2 M8x 16mm bolt 1 2 M5 taper washer J 2 M5 washer Part I a-Wood Stud Mounting Usewallplateasatemplate.makesureitis level, and mark two mounting holes along the center lines of the wood studs. Drill two 3/1 6"(5mm)dia. holes 2"(50mm) deep. Level wall plate and attach to wall with two long bolts( I) and two washers (2) by box wrench(4). Tighten screws firmly. Do not overtighten. Wood stud 2"(50mm)) N //////// 3/1 6"(5mm) Part I b-Concrete wall mounting Level wall plate and use wall as a template to mark two holes. Drill two 3/1 0"(8mm) dia. holes 2"(50mm) deep. Insert two anchors(3) into holes and secure wall plate with two long bolts(l) and two washers(2) by box wrench(4).Tighten screws firmly. Do not overtighten. Part 2-Attaching Supportable block and TV connection blockTo Screen First, select the small(A.B), medium(C,D,E,F) or large(G.H) screws. To attach supportable block by using selected screws(A,C,E,G) and washers(l), and then attach TV connection block to screen by using selected screws(B,D,F,H) and washers (J). Tighten screws firmly but do not overtighten. WARING screws(A,B,C,D)need washer, screws(E,F,G,H) don't need washer....