Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Apex Digital, Modèle LD3248

Fabricant : Apex Digital
Taille : 3.96 mb
Nom Fichier : a6aa10a3-99e1-4faf-94de-dee4660e509b.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


This Quick Setup Guide will answer the most frequently asked questions for setup, installation and use. Take a moment to register your product at We encourage you to visit us at for answers to your questions. Access our 24 hour Customer Support and FAQ’s page or receive personalized email technical support. Order accessories online or speak to a customer support representative at (866)427-3946. TV Rear Panel ON "H OFF o MASTER POWER □ COMPONENT 2 YPbPr y(5) »(S) >(§) l(§) Y(§) №(§) »(•) ■»(•) L(§) COMPONENT 1 YPbPr RF IN ANTENNA The rear panel illustration is provided to show video INPUT connections (and SPDIF digital audio output) available to you. Reference the INPUT labels then determine the connections best suited to hook up your HD and non-HD equipment. See the user manual for complete details. RF Input Connection • Use a rooftop or amplified indoor antenna to receive local HD signals over the airwaves. For assistance in choosing the correct one for your area, visit • CableTV - Subscribe to HDTV programming through your local cableTV provider. An HD cable box is required. • Satellite - Subscribe to HDTV programming through DirecTV or Dish network. An HD set top box is required. • Connect the RF coaxial (75 ohm) cable from your existing TV antenna or the cable wall outlet to the RF input located on the TV’s rear panel. • Run Channel Auto Scan (refer to next step) to receive available local digital TV channels into the television’s tuner. .X TV REAR PANEL O n -m- or ■m- Ca ble Wall Outlet Initial TV Setup After you have initially connected your TV antenna or cable (no set top box), turn the television ON. A screen will display asking you to run a Channel Auto Scan. It is here where you will select AIR/CABLE options to search and receive available local digital channels. Channel Label DTV Signal ©elect (<:;(>) Move (mmT) Exit • Press the MENU button on the remote control. NOTE: For cable or satellite users with no TV antenna, there no need to run Channel Auto Scan. Connect your cable or satellite set top box to one of the available inputs on the TV for viewing. • Using the A ► arrow buttons, scroll to highlight TV menu. • Press the down T arrow button to highlight AIR/CABLE, then press A ► arrow buttons to select. NOTE: Select AIR when connecting an indoor/outdoor antenna. Select CABLE when you subscribe to a pay television service (with no set top box) and the television is connected through the RF input. • Press the ▼ arrow button to select Auto Scan. • If AIR was selected in the previous step, press the right ► arrow button twice to start Auto Scan. • If CABLE was selected in the previous step, press the right ► arrow button. CABLE SYSTEM will display and be highlighted. Press the right ► arrow button to select STD > IRC > HRC > Auto (Auto is recommended). • Press the down T arrow button to highlight Auto Scan and press ENTER to start Auto Scan. HDMI Input Connection BEST Video Performance Use of this pure digital technology offers enhanced high definition video and digital audio all via a single cable. There are three (3) HDMI inputs available for use with HD Set Top Boxes, gaming consoles and HD DVD / Blu-ray players. How to Connect HDMI • From your external digital A/V equipment, connect an HDMI cable from the HDMI output to the HDMI input on the TV’s rear panel. TV REAR PANEL i—pcin—i o ■immm ts?" optional HDMI cable 000 i Digital Set Top Box, Gaming Console, or DVD w/ HDMI interface Component Input Connection BETTER Video Performance There are two (2) YPbPr component video and audio inputs for use with set top boxes, gaming consoles, and DVD players. How to Connect Component • When connecting A/V equipment to your television, match the colors of the connecting jacks (Video: Blue, Green, Red; Audio: White/Red) • Connect optional component video cables (blue, green, red) from the video output jacks (Y, Pb, Pr) on your external A/V equipment (ie: DVD Player, set top box) to the YPbPrl and/or YPbPr2 input(s) on the TV’s rear panel. • Connect white/red audio cables for sound from the audio (L/R) output jacks on your external A/V equipment (ie: DVD Player, set top box) to the YPbPrl or YPbPr2 L/R input(s) on the TV’s rear panel. Composite/S-Video Connection GOOD Video Performance Composite and S-Video output jacks are available on most set top boxes and DVD players. (Component or HDMI connections are recommended for best performance, if possible). How to Connect Composite • When connecting A/V equipment to your television, match the colors of the connecting jacks (Video: Yellow; Audio: White/Red) • Connect the yellow video cable from the video output jack on your external A/V equipment (ie: DVD Player, set top box) to AVI or AV2 input on the TV’s rear panel. • Connect the white/red audio cables for sound from the audio (L/R) output jacks o...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories