Log:
Évaluations - 3, GPA: 4.7 ( )

Instructions JVC, Modèle HD-52G657

Fabricant : JVC
Taille : 6.93 mb
Nom Fichier : 9340d49a-367f-0774-75e7-d4b3aa8df281.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


can be used when it is set to ON in the SET CLOCK menu. • Only when the MODE is set to AUTO, the Daylight Saving Time feature automatically adjusts your TV’s clock for Daylight Saving. • The real time and D.S.T. may not be set correctly depending on the broadcasting signal and receiving conditions. In this case, set your clock manually and turn D.S.T. to OFF. • You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions. 57 Onscreen Menus On/Off Timer Onscreen Menus On/Off Timer The on/off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home. Press the MENU button .† To ON/OFF TIMER v® To enter (begins with ON TIME) v® To set the hour (AM/PM) you want the TV to turn on OFF TIME CHANNEL ON VOLUME 10:00 PM ON TIME MODE ON/OFF TIMER 7:00 PM CURRENT EVERYDAY NO ON/OFF TIMER † To move to minutes PRESS OK TO FINISH SELECT OPERATE EXIT MENU v® To set the minutes † To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the OFF TIME the same way as ON TIME † To accept OFF TIME and move to CHANNEL v® To select channel † To ON VOLUME v® To set the volume level † To move to MODE v® Choose ONCE or EVERYDAY † To ON/OFF TIMER v® Choose YES to accept the timer setting, choose NO if you don’t wish to accept Press the OK button to finish Press the MENU button to exit the menu Notes: • The on/off time cannot be set to locked or guarded channels. • In order for the on/off timer to work, the clock must be set. • After a power interruption, the timer settings must be reset. • The digital channel is set only set to the marked channel in channel summary. • The blocked channel cannot be set. 58 Onscreen menus Lamp Timer Reset Onscreen menus Lamp Timer Reset The lamp replacement message will appear when you need to change the lamp. After you replace the lamp, you need to reset the timer which is built into your television. Press the MENU button .† To LAMP TIMER RESET v® To Enter The following message will appear. CLOCK / TIMERS SELECT OPERATE EXITMENU NEXT PAGE PREVIOUS SET CLOCK ON / OFF TIMER LAMP TIMER RESET PRESS OK TO RESET THE LAMP TIMER. Press the OK button while the above message appears on the television screen. THE LAMP TIMER IS RESET SUCCESSFULLY. The lamp timer has now been reset. Notes: • You can use the Lamp Timer Reset only after replacing the lamp. • See Page 73 for instructions on lamp replacement. 59 Button Functions Multi Screen Function Button Functions Multi Screen Function Your television has two kinds of screen: SPLIT (2 channels) and INDEX (12 channels). Note: After you press any multiscreen buttons, if you press the menu button, only the picture adjust screen will appear. Split Activate the split-screen option by pressing SPLIT on the remote control. The channel (or input) you were watching before pressing SPLIT will appear on the left, the new channel will appear on the right. The sound will continue to come from the main screen channel (or input). To turn split-screen off and return to normal television viewing, press SPLIT again or press the BACK button. 07 MAIN SCREEN PICTURE V-1 SPLIT SCREEN PICTURE Notes: • If the signal that you are watching is coming from the HDMI input, you cannot enter the SWAP or INDEX mode. • Main Screen and Split Screen will not display the same channel or input at the same time. • Split screen will not display digital channel. • You can enter the SPLIT mode when the screen is in NORMAL or INDEX mode. • Split-screen functions will not work with locked channels or channels blocked by V-Chip ratings limits. A gray screen will display instead. • With split screen, the picture from the component terminal and DIGITAL-IN terminal will not be displayed. • The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of 480p, 720p and 1080i from the component terminal and DIGITAL-IN terminal. • After you press the SELECT button, and select SPLIT SCREEN when you press the OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will be automatically selected about 8 seconds later. • Aspect does not work in SPLIT mode. • When you press the MENU button in SPLIT mode, it appears only as Picture Adjust menu. 60 Button Functions Index Button Functions Index This allows you to quickly look at up to 12 channels at a time so that you can decide which one to watch. 1 2 3 4 5 6 7 8 9 10 11 12 Notes: • Only analog channel input signal will be displayed. • You can watch the channel added in channel summary. See page 33. Freeze Pressing the FREEZE button causes the screen to change to the split-screen display with the still picture displayed on the right. In order to return to the normal display, press the FREEZE button once again. Swap You can exchange the channel (or input) displayed in the split screen window for the main screen image by pressing the SWAP bu...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories