Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Check the computer's refresh rate and set it to 60Hz. Computers that cannot set the refresh rate to 60 Hz, can not be used with this TV. Refer to the computer's instruction manual. *Apple Macintosh is a registered trademark of Apple Computer, Inc. Note: • If you are inputting a PC signal that is invalid, "Invalid Signal" will appear on the TV screen. It appears when the input is PC and it is a single screen. 23 Quick Setup Quick Setup Step 3 – The Interactive Plug In Menu When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear. • Setting the TV’s clock to the correct time so your timer functions will work properly. You can choose “AUTO” or “MANUAL” for setting the clock. • The auto tuner setup of which channels you wish to receive. We recommend you complete the interactive plug-in items before you start using your television. Notes: • The interactive plug-in menu setting does not appear if your TV has been turned on before. In this case use the onscreen menus to perform these settings. See pages 44, 59, 34. • If you press the Menu button while setting up the interactive plug-in menu, it will skip over it. Language After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your onscreen menus in three languages: ENGLISH, FRANCAIS (French) or ESPANOL (Spanish). LANGUAGE/LANGUE/IDIOMA ENGLISH NEXT SELECT OPERATE EXITMENU v® To choose a language: ENGLISH, FRANCAIS or ESPANOL † To NEXT (To set clock) (To be continued...) 24 Quick Setup Quick Setup Auto Clock Set Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public analog broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal: SET CLOCK v® To choose AUTO † To TIME ZONE TIME --: ---TIME ZONE ATLANTIC D.S.T. ON v® To select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) MODE AUTO † To move to D.S.T. (Daylight Savings Time) v® To turn D.S.T. ON or OFF NEXT † To NEXT (To Auto Tuner Setup) MENU SELECT OPERATE EXIT Notes: • D.S.T. can be used when it is set to ON in the SET CLOCK menu. • Only when the MODE is set to AUTO, the Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October. • You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions. Manual Clock Set To set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. v® To choose MANUAL SET CLOCK † To TIME v® To set the hour TIME --: ---TIME ZONE ATLANTIC D.S.T. ON † To minute v® To set the minute MODE MANUAL † To TIME ZONE v® To select your time zone: (Atlantic, Eastern, START CLOCK Central, Mountain, Pacific, Alaska or SELECT OPERATE EXIT Hawaii) MENU † To move to D.S.T. (Daylight Savings Time) v® To turn D.S.T. ON or OFF † To START CLOCK Note: • You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions. (To be continued...) 25 Quick Setup Quick Setup Auto Tuner Setup In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels. AUTO TUNER SETUP SELECT OPERATE EXITMENU AIRTUNER MODE START v® To choose CABLE or AIR (or SKIP when you skip Analog Auto Tuner Setup) † To START After Analog Auto Tuner Setup is finished, Digital Auto Tuner Setup starts. 20 Now Programming... NOW PROGRAMMING ! 48 When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience. Notes: • If you want to cancel the Auto Tuner Setup, press the MENU button. • Noise muting will not work during Auto Tuner Setup. • If you choose SKIP, it finished without doing the Auto Tuner Setup. Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal. 26 Quick Setup Quick Setup Remote Programming You can program your remote to operate your cable box, satellite receiver...