Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Important Safeguards and Precautions
READ AND RETAIN ALL SAFETY AND
OUTDOOR ANTENNA INSTALLATION
OPERATING INSTRUCTIONS. HEED ALL
1 SAFE ANTENNA AND CABLE CONNECTION
WARNINGS IN THE MANUAL AND ON UNIT
An outside antenna or cable system must be properly
grounded to provide some protection
INSTALLATION
against built up static charges
NEC - NATIONAL
ANTENNA LEAD
ELECTRICAL CODE
IN WIRE
1 POWER SOURCE CAUTION
and voltage. Section 810 of
ANTENNA
GROUND
DISCHARGE UNIT
CLAMP
(NEC SECTION 810-20)
Operate only from power source indicated on unit
the National Electrical Code,
GROUNDING
or in this manual. If uncertain, have your Electric
ANSI/NFPA 70 (in Canada,
CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
Utility Service Company or Video Products Dealer
part 1 of the Canadian
EQUIPMENT
GROUND CLAMPS
POWER SERVICE
verify your home power source.
Electrical Code) provides
GROUNDING
ELECTRODE SYSTEM
information regarding proper
(NEC ART 250, PART H)
2 POWER CORD PLUG
grounding of the mast and supporting structure, grounding
For safety, this unit has a polarized type plug (one
of the lead-in wire to an antenna discharge unit, size of
wide blade), or a three-wire grounding type plug.
grounding conductors, location of antenna discharge unit,
Always hold the plug firmly and make sure your
connection to grounding electrodes, and requirements for
hands are dry when plugging in or unplugging the
the grounding electrode.
AC power cord. Regularly remove dust, dirt, etc.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
on the plug.
POWER LINES OR CIRCUITS
POLARIZED PLUG CAUTION:
Locate an outside antenna system well away from power
The plug fits into outlet one way. If it cannot be fully
lines and electric light or power circuits so it will never touch
inserted, try reversing it. If it still will not fit, have an
these power sources should it ever fall. When installing
electrician install the proper wall outlet. Do not
antenna, absolutely never touch power lines, circuits or
tamper with the plug.
other power sources as this could be fatal.
GROUNDING PLUG CAUTION:
USING THE UNIT
The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
Before unit is brought out of storage or moved to a new location,
outlet. Do not tamper with the plug.
refer again to the INSTALLATION section of these safeguards.
3 POWER CORD
1 KEEP UNIT WELL AWAY FROM WATER OR
To avoid unit malfunction, and to protect against
MOISTURE, such as vases, sinks, tubs, etc.
electrical shock, fire or personal injury:
2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG
-Keep power cord away from heating appliances
IMPACT, unplug unit and have it inspected by a qualified
and walking traffic. Do not rest heavy objects on,
service technician before use.
or roll such objects over the power cord.
3 ELECTRICAL STORMS
-Do not tamper with the cord in any way.
During a lightning storm, or before leaving unit unused for
-An extension cord should have the same type
extended periods of time, disconnect all equipment from the
plug (polarized or grounding) and must be
power source as well as the antenna and cable system.
securely connected.
4 WHEN UNIT IS PLUGGED IN
-Overloaded wall outlets or extension cords is a
• DO NOT OPERATE IF:
fire hazard.
- liquid has spilled into unit.
-Frayed cords, damaged plugs, and damaged or
- unit was dropped or otherwise damaged.
cracked wire insulation are hazardous and
- unit emits smoke, malodors, or noises.
should be replaced by a qualified electrician.
Immediately unplug unit, and have it inspected by a service
4 DO NOT BLOCK VENTILATION HOLES
technician to avoid potential fire and shock hazards.
Ventilation openings in the cabinet release heat
• Never drop or push any object through openings in unit.
generated during operation. If blocked, heat
Touching internal parts may cause electric shock or fire hazard.
build-up may result in a fire hazard or heat
• Keep magnetic objects, such as speakers, away from unit
damage to cassettes.
to avoid electrical interference.
For your protection:
5 USING ACCESSORIES
a. Never cover ventilation slots while unit is ON,
Use only accessories recommended by the manufacturer to
or operate unit while placed on a bed, sofa,
avoid risk of fire, shock, or other hazards.
rug, or other soft surface.
6 CLEANING UNIT
b. Avoid built-in installation, such as a book case
Unplug unit. Use a clean, dry, chemically untreated cloth to gently
or rack, unless properly ventilated.
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or
5 AVOID EXTREMELY HOT LOCATIONS OR
forced air that could over-spray, or seep into unit and cause
SUDDEN TEMPERATURE CHANGES
electrical shock. Any substance, such as wax, adhesive tape, etc.
Do not place unit over or near a heater or
may mar the cabinet surface. Exposure to greasy, humid, or dusty
regulator, in direct sunlight, etc. If unit is suddenly
areas may adversely affect internal parts.
moved from a cold place to a warm place,
SERVICE
moisture may condense in unit and on the tape
causing damage.
1 DO NOT SERVICE PRODUCT YOURSELF
6 TO AVOID PERSONAL INJURY
If, after carefully following detailed operating instructions, the
• Never place unit on support or
unit does not operate properly, do not attempt to open or
stand that is not firm, level,
remove covers, or make any adjustments not described in the
and adequately strong.
manual. Unplug unit and contact a qualified service technician.
The unit could fall causing
2 REPLACEMENT OF PARTS
serious injury to a child or
Make sure the service technician uses only parts specified
adult and damage to the unit.
by the manufacturer, or have equal safety characteristics as
• Move any appliance and cart
original parts. The use of unauthorized substitutes may
combination with care. Quick
result in fire, electric shock, or other hazards.
stops, excessive force, and uneven
3 SAFETY CHECK AFTER SERVICING
surfaces may cause objects to overturn.
After unit is serviced or repaired, request that a through safety
• Carefully follow all operating instructions.
check be done as described in the manufacturer’s service
literature to insure video unit is in safe operating condition.
2
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
LSQT0516A_01p09+1.p65
2
11/13/2001, 11:39 AM
... Ce manuel est également adapté pour les modèles :
TV - PVC1332W (1.17 mb)
TV - PVC1342 (1.17 mb)
TV - PVC1352W (1.17 mb)