Log:
Évaluations - 2, GPA: 4 ( )

Instructions Denon, Modèle AVR-3805

Fabricant : Denon
Taille : 355.66 kb
Nom Fichier : 901a050a-6911-42cd-a934-a4d4babbb8ea.pdf
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


COMMAND : The message sent to a system(AVR/AVC) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC) The result is sent, when a system is operated directly and a state changes. *The form of EVENT presupposes that it is the same as that of COMMAND. **Refer to the following table for the contents of COMMAND and EVENT. RESPONSE : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC) if the ‘request command’ (COMMAND+?+CR(0x0D)) has came from a controller. The RESPONSE should be sent within 200ms of receiving the COMMAND. *The form of RESPONSE presupposes that it is the same as that of EVENT. Basic specification : The command by ASCII CODE, parameter expression *ASCII CODE which can be used is from 0x20 to 0x7F : the alphabet and the number of 0-9 , and space (0x20) , Some signs , AND carriage return(0x0D)---It is used only as a pause sign. Command structure : COMMAND + PARAMETER + CR(0x0D) COMMAND : ASCII CODE of 2 characters ex. SI : Select Input source MS : surround Mode Setting MV : Master Volume setting PW : system PoWer setting PARAMETER : ASCII CODE ( up to 25 characters) ex. DVD : function name CDR/TAPE-1 : function name THX SURROUND EX : surround mode name SUPER STADIUM : surround mode name *Special Parameter--- ? : for request command -2 The example of a command * is the meaning of 0x0D. SIDVD : Select Input source DVD MSTHX SURROUND EX : surround Mode Set to THX SURROUND EX MVUP : Master Volume UP PWON : system PoWer ON PWSTANDBY : system PoWer STANDBY SI? : Request command for now playing input source >> Return RESPONSE ‘SI***’ -3 Others A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT. C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including an intact channel. In this case, the data of an intact channel is set to "50". D) Since SURROUND MODE changes simultaneously when the INPUT source changes, the SURROUND MODE (and also the value of the channel volume of all channels , It described in B) ) returns as EVENT. E) When SURROUND MODE is the same in between INPUT source change before and after, EVENT of SURROUND MODE and CHANNEL VOLUME does NOT return. F) Although EVENT of SURROUND MODE returns when the present SURROUND MODE is set up again, CHANNEL VOLUME does NOT return. G) When SURROUND MODE is changed, before returning SURROUND MODE after change as EVENT, the present SURROUND MODE is returned. H) The RESPONSE should be sent as opposed to the request command by all the commands with which an EVENT exists , not need to the another request commands(ex. SV command). I) The PARAMETER (with COMMAND and RESPONSE, EVENT) of minimum level of MASTER VOLUME defines “99”. J) If the MASTER VOLUME & CHANNEL VOLUME set with 0.5dB step, the PARAMETER (with COMMAND and RESPONSE, EVENT) defines three ASCII characters as bellows. ex. MASTER VOLUME = +1.0dB : MV81 +0.5dB : MV805 0dB : MV80 -0.5dB : MV795 -1.0dB : MV79 | | -79.5dB : MV005 -80.0dB : MV00 ---: MV99 * At the **.0dB step, only uses two ASCII characters as PARAMETER, same as usual. -4 COMMAND and PARAMETER list COMMAND PARAMETER function example PW ON POWER ON/STANDBY change PWON STANDBY PWSTANDBY MV UP MASTER VOLUME UP/DOWN , direct change to **dB **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) MVUP DOWN MVDOWN ** MV80 CV FL UP CHANNEL VOLUME UP/DOWN , direct change to **dB ---FRONT Lch **:38 to 62 by ASCII , 50=0dB CVFL UP FL DOWN CVFL DOWN FL ** CVFL 50 FR UP ---FRONT Rch **:38 to 62 by ASCII , 50=0dB CVFR UP FR DOWN CVFR DOWN FR ** CVFR 50 C UP ---CENTERch **:38 to 62 by ASCII , 50=0dB CVC UP C DOWN CVC DOWN C ** CVC 50 SW UP SW DOWN SW ** ---SUBWOOFERch **:38 to 62 by ASCII , 50=0dB CVSW UP CVSW DOWN CVSW 50 SL UP ---SURROUND Lch **:38 to 62 by ASCII , 50=0dB CVSL UP SL DOWN CVSL DOWN SL ** CVSL 50 SR UP ---SURROUND Rch **:38 to 62 by ASCII , 50=0dB CVSR UP SR DOWN CVSR DOWN SR ** CVSR 50 SBL UP ---SURROUND BACK Lch (SBch 2SP) **:38 to 62 by ASCII , 50=0dB CVSBL UP SBL DOWN CVSBL DOWN SBL ** CVSBL 50 SBR UP ---SURROUND BACK Rch (SBch 2SP) **:38 to 62 by ASCII , 50=0dB CVSBR UP SBR DOWN CVSBR DOWN SBR ** CVSBR 50 MV , CV COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section) -5 COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP SB DOWN CVSB DOWN SB ** **:38 to 62 by ASCII , 50=0dB CVSB 50 MU ON OUTPUT MUTE ON/OFF change MUON OFF MUOFF SI PHONO Select INPUT source SIPHONO CD SICD TUNER SITUNER DVD SIDVD VDP SIVDP TV SITV DBS/SAT ---Select DBS function at AVR-...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories