Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Saturday and Sunday can each have individual programs. Every weekday, Saturday, or Sunday program has 4 daily settings: WAKE, LEAVE, RETURN, and SLEEP. . WAKE: The desired room temperature and time the heating period should begin when you are present in the morning. If desired, allow 15 minutes prior to wake time for the room to reach comfort level. . LEAVE: The time and the lower desired temperature you would like your room to be when you leave for the day. This is an energy saving period. . RETURN: The desired room temperature and time the heating period should begin when you are present in the evening. If desired, allow 15 minutes prior to your return time for the room to reach comfort level. . SLEEP: The time and the lower desired temperature you would like your room to be while you sleep. This is an energy saving period. Each setting needs to be programmed with a time and temperature. Programming begins by directing you to set the time of day for the 4 daily settings for weekdays, Saturday, and Sunday. Once all times have been set, the program will direct you to set the temperatures for the 4 daily settings for weekdays, Saturday, and Sunday. Setpoint range: 41°F to 86°F (5°C to 30°C). Operation Modes: . The AUTOmatic mode runs the programmed sequence recorded by the user. Use this mode when daily comfort needs and routine are in accordance with the recorded program. . The MANUAL mode overrides the recorded program sequence. Use this mode when out of town or when maintaining a certain temperature set point for an extended period of time is desired. Setting the manual temperature to a cool set point of 62 degrees or less helps reduce energy costs. The MANUAL mode stays active until the AUTOmatic program is activated. . The Temporary Setpoint overrides the programmed temperature when AUTO mode is activated. Set a Temporary Setpoint when changing the temperature for a given period of the day. The setpoint will stay active until the next programmed period for the given day. Energy Saving Tips: Here are a few tips to maximize energy saving capabilities: . When programming, always set the temperature back for a minimum of 8 hours when away from home or asleep. . Each 2-degree decrease for an 8 hour period is equivalent to a 2% savings. . Maximize the 8 hour temperature set back by reducing the setpoint 8 to 10 degrees from your preferred comfort setpoint. . Use the manual mode to set and hold the temperature back 8 degrees or more while on vacation. . Or, maintain default program. The thermostat comes equipped with an energy saving program, as outlined in the “Default Settings” table. 3. To set the hours, press the down Ў button to decrease the hour or the up^ button to advance. Note: the clock is a 24 hour clock and will display AM or PM to distinguish time of day. The AM/PM icon will change with setting the hours. 5. Press the MODE button to activate the set day of week mode. The SU icon will flash. To set the day, press the down Ў button to select the previous day or the up ^ button to select the next day. Only the selected day will show on the LCD. Press the MODE button to save your selection. 1. To activate the PROGRAM MODE, press the MODE button. CLOCK, NEXT, SCHED appear on the display. 4. Press the MODE button to activate the set minutes mode. The minute numerals will flash. To set the minutes, press the down Ў button to decrease the minutes or the up ^ button to advance. 2. To activate the CLOCK MODE, press the DOWN Ў button. The hour numerals will flash. 7. To program the WAKE, LEAVE, RETURN and SLEEP time settings for both Saturday (SA) and Sunday (SU), return to the beginning of the PROGRAMMING AUTO SCHEDULE instructions and repeat. 5. To program the RETURN time setting, press the down Ў button to decrease the time or the up ^ button to increase. When the time setting is correct, press the MODE button to program the SLEEP time setting. 3. To program the WAKE time setting, press the down Ў button to decrease the time or the up ^button to increase. When the time setting is correct, press the MODE button to advance to program the LEAVE time setting. 1.To activate the PROGRAM MODE, press the MODE button once. CLOCK, NEXT, SCHED appear on the display. 8. After programming the Saturday and Sunday time settings, press the MODE button to program the Monday through Friday WAKE setpoint temperature. To program setpoint temps, press the down Ў button to decrease the temp or the up ^ button to increase. When the temperature setting is correct, press the MODE button to advance to program the LEAVE temp. 6. To program the SLEEP time setting, press the down Ў button to decrease the time or the up ^ button to increase. When the time setting is correct, press the MODE button to program the Saturday WAKE time setting. 4. To program the LEAVE time setting, press the down Ў button to decrease the time or the up ^ button to increase. When the time setting is correct, press the MODE button to advance to program the RE...