The last set of memorized readings will be displayed. 2. Another press of the Memory button will recall the previous set of readings. 3. All readings stored in memory will be displayed with its sequence number. Helpful Tips Here are a few helpful tips to help you obtain more accurate readings: • Do not measure your blood pressure immediately after consuming a large meal. To obtain more accurate readings, please wait one hour before measuring. • Do not smoke or drink alcohol before measuring your blood pressure. • You should not be physically tired or exhausted while taking a measurement. • It is important that you relax during measurement. Take a 15-minute rest before a reading. • Do not take measurements if you are under stress or under tension. • Take your blood pressure at normal body temperature. If you are feeling cold or hot, wait a while before taking a measurement. • If the monitor is stored at very low temperature (near freezing), have it placed at a warm location for at least one hour before using it. • Wait about 5 minutes before taking the next pressure measurement. If any abnormality should arise during use, please check the following points: Troubleshooting Symptom Check Point Correction No display when the POWER button is pressed Have the batteries run down? Replace with two new batteries Have the batteries’ polarities been positioned incorrectly? Re-insert the batteries in the correct positions. EE mark shown on display or the blood pressure value is displayed excessively low (high) Is the cuff placed correctly? Wrap the cuff properly so that it is positioned correctly. Is the cuff pressure pumped enough? (50~60 mmHg above normal systolic value?) Measure it again and pump up 50~60 mmHg more than normal systolic value. Did you talk or move during measurement? Measure it again quietly. Did you shake the arm with the cuff on? Cautionary Notes: 1. The unit contains high-precision assemblies. Therefore, avoid extreme temperatures, humidity, and direct sunlight. Avoid dropping or strongly shocking the main unit, and protect it from dust. 2. Clean the blood pressure monitor body and the cuff carefully with a slightly damp, soft cloth. Do not iron, wash or use chemical cleaner on the cuff. Never use thinner, alcohol or petrol (gasoline) as cleaner. 3. Leaky batteries can damage the unit. Remove the batteries when the unit will not used for a long period of time. 4. The unit should not be operated by children. 5. If the unit is stored near freezing, allow it to acclimate at room temperature before use. 6. Your Lumiscope Blood Pressure Monitor is not field serviceable. You should not use any tool to open the device nor should you attempt to adjust anything inside the device. If you have any problems, please contact the store or the doctor from whom you purchased your Lumiscope Blood Pressure Monitor. 7. For users diagnosed with common arrhythmia (atrial or ventricular premature beats or atrial fibrillation), diabetes, poor circulation of blood, kidney problems, or for users who have suffered a stroke, the device might not be suitable for use. 8. Do not use on unconcious patients. Specifications: Measurement Method : Oscillometric Measurement Range : Pressure: 20~280mmHg; Pulse: 40~180 beats/min Pressure Sensor : Semi conductor Accuracy : Pressure: ± 3mmHg; Pulse: ± 5% of reading Inflation : Manual Inflation Deflation : Automatic Pressure Release Valve Memory capacity : 60 memories Auto-shut-off : 1 minute after last button operation Operating Environment : Temperature: 5 °C ~ 45 °C (41 °F~113 °F); Humidity: 40 ~ 85% Storage Environment : Temperature: -10 °C ~ 60 °C (14 °F~140 °F ); Humidity: 10 ~ 95% Power Source : 3V DC, two ‘AA’ Batteries Dimensions : 115 (L) X 94.5 (W) X 60.5 (H) mm Weight : 320 g (G.W.) (No Batteries) Arm circumference : Adult: 24 ~36 cm (9.4”~14.2”) (standard) *Specifications are subject to change without notice. Two-Year Limited Warranty: Lumiscope guarantees this product free from defects in material and workmanship for a period of two years from the date of purchase, except as noted below: This Lumiscope product warranty does not cover damage caused by misuse or abuse, the attachment of any unauthorized accessory, alteration to the product, or any other conditions whatsoever that are beyond the control of Lumiscope. Lumiscope shall not be responsible for any type of incidental, consequential, or special damage. All implied warranties, including, but not limited to those implied warranties of fitness and merchantability, are limited to the total duration of two years from the original date of purchase. To obtain warranty service on your Lumiscope Blood Pressure Monitor, please contact the Lumiscope Repair Department at 1-800-672-8293 or visit There is a $15 fee for return shipping and handling. Please make checks payable to The Lumiscope Co., Inc. Upon receipt, Lumiscope will repair or replace, as appropriate, this blood pressure monitor and return it to you....