Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which cause the user at his own expense will required to take whatever measures may be required to correct the interference. TABLE OF CONTENTS page TO OUR CUSTOMERS ........................................................................................................1 PRECAUTIONS ......................................................................1 APPEARANCE AND NOMENCLATURE .....................................................................1 ’ CONTROL LOCKS AND MODE SELECTOR KEYS ....................................2 DISPLAY ..........................................................................................................................4 KEYBOARD LAYOUT ..........................................................................................................5 FUNCTION OF EACH KEY ................................................................................................6 OTHER OPTIONAL KEYS .....................................................................................15 REGISTERING PROCEDURE FOR SALES ..........................................................................17 READ(X) AND RESET(Z) REPORTS ................................................................................28 PROGRAMMING OPERATIONS IN "SET" MODE ................................................................34 (Refer to the TABLE OF CONTENTS on page 34.) PROGRAMMING OPERATIONS IN "MGR" MODE (MANAGER'S PROGRAMMING) ................66 CHARACTER CODE TABLE ................................................................................................72 PROGRAMMING OPERATIONS THROUGH THE PROGRAMMING KEYBOARD (optional) .. 73 VERIFICATION OF PROGRAMMED DATA ..........................................................................76 REMOTE SLIP PRINTER OPERATION ..............................................................................79 CUTTER BLOCK OPEN DETECTOR AND PAPER NEAR-END DETECTOR ............................82 ECR PRINTER MOTOR LOCK AND REMOTE SLIP PRINTER MOTOR LOCK DETECTORS. 83 PAPER ROLL REPLACEMENT AND OTHER MAINTENANCE OPERATIONS ..........................84 POWER FAILURE PROCESS ..................................................................................89 SPECIFICATIONS ............................................................................................................89 TO OUR CUSTOMERS Thank you for choosing a TEC Electronic Cash Register MA-1050-100 series. This instruction manual provides a description of the functions and handling of this register and should be read carefully to obtain maximum performance. Since every consideration has been given to safety, there is no danger of damaging the machine by incorrect operation. doubts concerning the strict quality control Please refer to this manual whenever you have any machine. This machine has been manufactured under and should give you full satisfaction. However, if the machine is damaged during transit, or there are any unclear points in this manual, please contact your local TEC representative. | The specifications described in this manual may be modified by TEC, if necessary. | Be sure to keep this manual for future reference. PRÉCAUTIONS . 1. The keys on the keyboard work with a light touch. Avoid pressing the keys too hard. 2. Avoid handling the machine with wet hands. 3. Do not apply thinner or other volatile oils to the cabinet or other plastic parts. If the dirt is very bad, wipe off with a piece of cloth soaked in neutral detergent and sqeezed tightly. APPEARANCE AND NOMENCLATURE Receipt Cover Journal Window Receipt Outlet Validation Slip Inlet Ribbon Cover Keyboard Cash Drawer Display Clerk Locks GT Lock (optional) - Mode Lock Power Switch — Drawer Protector Lock (or Drawer Release Lock for SP Drawer) The power switch is provided at the righthand side of the cabinet. The AC power is turned on when the switch is pushed tc. ON, and turned off when the switch is pushed to OFF. - 1 - CONTROL LOCKS AND MODE SELECTOR KEYS MOPE LOCK X MGR REG v , Q LOCK (POSITION) LOCK ... REG MGR □ SET (FUNCTION) Displays the current time. The register operations are locked when the Mode Lock is set to this position. Paper feeding (using the j RF | or | JF | key) wi11 not be a1lowed. Normal cash register' operations are carried out in this mode, requiring one of the Clerk Keys to be set to ON. The operations programmed to require the "MGR" position cannot be done in this mode. The sale totals can be read and the programmed data can be verified in this position. Tax calculation test may be operated also in this position. This position ...
Ce manuel est également adapté pour les modèles :Shop Equipment - MA-1050-100 Series (1.57 mb)