Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Read these instructions for use carefully before using the appliance and save them for future reference. . Check if the voltage indicated on the bottom of the appliance corresponds to the voltage in your home before you connect the appliance. . Connect the appliance to an ear thed wall socket. . Avoid touching the metal par ts of the toaster, as they get ver y hot during toasting. Only touch the controls and lift the appliance by its plastic body. . Do not immerse the appliance or mains cord in water or other liquids. . Only allow children to operate the toaster under close super vision. . Never let the toaster operate unattended. . Unplug the appliance before cleaning. Remove the plug by gripping the plug body and pulling it from the socket. Never yank or twist the cord. . Do not use the toaster under or near cur tains or other flammable materials. Do not operate it under wall cabinets. Please note that bread may burn. . If a slice of bread gets stuck inside the toaster, unplug the appliance and allow it to cool down before tr ying to remove the bread. Do not use a knife or a sharp tool, as these may cause damage to the heating elements. . This appliance is only intended for household use. It is not intended for commercial or industrial use. . If the mains cord is damaged, it must be replaced by Philips, a ser vice centre authorised by Philips or similarly qualified persons in order to avoid a hazard. The appliance is only meant for toasting bread. Do not put any other ingredients in the appliance, as this may lead to a hazardous situation. Oversized foods, metal foil packages or utensils must not be inser ted into the toaster, as this may cause a fire or an electrical shock. Immediately unplug the toaster if fire is obser ved. Before using the toaster for the first time - Remove any stickers and wipe the body and top of the toaster with a damp cloth. -Let the toaster first complete one toasting cycle without inser ting any bread to burn off any dust that may have accumulated on the heating elements during storing. Toasting bread 1 Put the appliance in a safe place, away from fire hazards such as curtains, and insert the plug into the wall socket. After you have inser ted the plug, the LEDs will blink quickly from left to right and back until the LED of the third browning level star ts to burn continuously to indicate that the toaster has reached its initial setting. If the toaster has not been used for 10 minutes, it will go into sleep mode, which means that all LEDs will go out. You can re-activate the toaster by pressing any button.The LED of the last browning level selected will go on again. . You can adjust the length of the cord by winding part of it round the brackets in the base of the appliance (fig. 1). 2 Put one or two slices of bread in the toaster (fig. 2). The type of bread and the state of the bread have no effect on the end result. Frozen, defrosted, fresh or old bread - the toaster's advanced sensor system always guarantees the same result. Note: When you want to toast only one slice of bread, always put it in the front slot of the toaster because of the location of the sensor. ENGLISH 3 Select the desired browning setting (fig. 3). Select a low setting for lightly toasted bread and a high setting for a dark browning result. Press the . button once or several times to select a lower setting for lighter toast. Press the . button to choose a higher setting for darker toast. On the control panel the LED of the chosen setting will burn yellow to show the browning level selected. 4 Push the toasting lever down to turn the appliance on (fig. 4). The toasting lever will only stay down if the appliance has been connected to the mains. Keep an eye on the toaster while using it. 5 Monitoring the toasting process (fig. 5). The LED of the browning setting selected stays on and the preheating light blinks red slowly. When the preheating phase has finished, this LED will go out.The first yellow browning LED will star t to blink slowly and will continue to do so until the browning level has been reached.The toast pops up when it is ready. The appliance gets hot during toasting. Do not touch the metal parts. . To remove smaller items, push the toasting lever a little further up (extra lift). . If bread gets stuck inside the toaster, remove the plug from the wall socket, let the appliance cool down completely and carefully remove the bread from the toaster. Do not use a knife or another sharp metal tool to do this and do not touch the metal internal parts of the toaster. 6 Adjust the toasting setting during toasting (fig. 6). When the toaster is operating you can press the . button to get darker toast or the . button to get lighter toast.The LED of the setting selected will burn yellow. Note: when you adjust to a lower setting for lighter toast, the toast may pop up immediately because the desired browning level has already been reached. 7 Interrupt the toasting process You can stop the toasting process at...
Ce manuel est également adapté pour les modèles :Toasters - HD2580/22 (502.57 kb)
Toasters - HD2580/26 (502.57 kb)