Évaluations - 4, GPA: 3.3
(
)
)
|
Photos et spécifications Life Fitness 93T |
Facilité d'utilisation
Repeat this step for each digit. 5THE MANAGER’S CONFIGURATION 5.1 ENTERING AND USING THE MANAGER’S CONFIGURATION To enter the Manager's Configuration, press and hold down the PAUSE key and press the CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays the words “SERVICE MENU”. Then, release the PAUSE key, press the QUICK START key, and press ENTER. The MESSAGE CENTER then displays, in turn, each of the configuration settings. Use the TIME arrow keys to scroll through the list of settings, or allow the MESSAGE CENTER to scroll automatically through the options. To stop the automatic scrolling, press the PAUSE key. To resume the automatic scrolling, press the PAUSE key again. To select a displayed option, press the ENTER key. The Manager’s Configuration settings are listed on the following page in the order in which they appear in the MESSAGE CENTER display. Use the INCLINE or SPEED keys to change settings. In most cases, changing a setting means turning it on or off. See the table on the following page for more information. 5.2 CONFIGURATION SETTINGS CONFIGURATION FACTORY SETTING DEFAULT DESCRIPTION LANGUAGE ENGLISH The language of the MESSAGE CENTER display. Choices include Portugese, Spanish, Dutch, Japanese, Italian, French, and German. MAXTIMETM SETUP OFF This feature enables fitness club managers to set workout duration limits during peak and non-peak hours of club traffic. If the setup is off, no duration limits are set. See the topic titled Using the Maximum Time Setup, which appears on the following page. STANDBY MODE SETUP OFF This feature enables fitness club managers to set periods at which the treadmill automatically powers up or powers down. See the topic titled Using the Standby Mode Setup, which appears on the following page. ENGLISH/METRIC UNITS ENGLISH The measurement unit type for weight, distance, and speed. TELEMETRY ON Switching on the telemetry feature makes it possible to use the Polar®-compatible Heart Rate Zone Training® exercise chest strap for monitoring the heart rate. SMART STOP OFF This feature is not available on this model. MAXIMUM SPEED 10.0 (MPH) for U.S. 12.0 for international This is the fastest speed at which the treadmill can operate. MINIMUM SPEED 0.5 (MPH) This is the slowest speed at which the treadmill can operate. PAUSE TIMEOUT 1 (minute) This is the maximum time during which a workout can remain in pause mode. WATTS DISPLAY OFF (Int'l: ON) If this option is enabled, the MESSAGE CENTER displays the Watts equivalent of the step rate. METS DISPLAY OFF If this option is enabled, the MESSAGE CENTER displays the METs equivalent of the step rate. PACE DISPLAY ON This feature displays the rate of minutes per mile. CALORIE PER HOUR DISPLAY ON (Int'l: OFF) If this option is enabled, the MESSAGE CENTER displays the number of calories burned per hour during the workout. DISTANCE CLIMBED DISPLAY OFF The total distance climbed, based on the incline and speed of the treadmill. WAX REMINDER OFF After the first 100 hours, then every 168 hours, the MESSAGE CENTER displays, "MAINTENANCE REMINDER - CLEAN THE NOZZLE." ACCELERATION RATE 3 The rate at which the treadmill accelerates to the selected speed, ranging from 1 (slowest) to 5 (fastest). DECELERATION RATE 3 The rate at which the treadmill decelerates to the selected speed, ranging from 1 (slowest) to 5 (fastest). MAXIMUM INCLINE 15.0 This option changes the maximum incline grade to a value lower than 15 percent. START MESSAGE SETUP N/A See “Using the START MESSAGE Setup” in this section. USING THE START MESSAGE SETUP This configuration allows for a custom start-up message to be displayed before the default “Select Workout or Press Quick Start” message. The custom message can contain up to 52 characters. CREATING A START MESSAGE After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and press ENTER. Use the SPEED ARROW keys to select an available letter, number or special character. Use the INCLINE ARROW keys to move forward or backward throughout the message, or insert spaces, one character at a time. The current character will blink until the position is moved with the INCLINE ARROW keys. SAVING A START MESSAGE To save the START MESSAGE, press ENTER. “MESSAGE SAVED” will appear in the message center confirming the message has been saved. To exit the start message setup without saving, press the clear key twice. “MESSAGE NOT SAVED” will appear in the message center confirming the message has not been saved. ERASING A START MESSAGE After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and press ENTER. Press enter to enter the current START MESSAGE. Press the COOL DOWN key to erase the current START MESSAGE. “MESSAGE ERASED” will appear in the message center stating the message has been erased. USING THE MAXTIMETM SETUP This feature allows the club to set different maximum workout durations to accomodate various traffic flows throughout t...