Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
Use the screwdriver to tighten the screws snug from the previous step. Caution: Do Not over tighten screws. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION To install the TV neck on the S-UB, S-RB, and S-TBT, follows these steps: STEP1 Remove the TV hole cover: On the back side of the neck tubing, using a flat screwdriver, unclench the TV hole cover from the notch. (The cover is not used anymore, but you may save it for future use as you like.) STEP2 Install TV bracket: Using a 5mm Hex Allen Key, install the TV bracket to the neck tubing with a 8mm button head screw. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION To install the TV neck on the S-TR, follows these steps: CAP STEP1 Using a #2 Phillips screwdriver, to remove the (19) screws from the back of the display. Next, remove the back cover and the upper cap cover with “Star Trac Logo on it (You will no longer need this cap cover and, if desired, you can store it away for any possible future use). SCREWS BACK COVER STEP2 Take the TV bracket from package and remove the bubble wrap. Insert the bracket into the rectangle tube. Using a 5mm Hex Allen Key to fasten (2) M8 button head screws with (2) washers. STEP3 Replace the top back cover. Use a #2 Phillips screwdriver insert (19) screws, retained from earlier step, into the plastic cover. Do not tighten now. Check the Cap with the neck and grommet. Make sure the Cap is flush with the top back plastic, and adjust if necessary. Use the screwdriver to tighten the screws, but don’t over tighten screws STAR TRAC UNIVERSAL TV BRACKET INSTALLATION To install the TV on the bracket follows these steps: 1. TV with 75x75mm mounting hole pattern: Install your TV onto the bracket, by using a 3mm Hex Allen Key to fasten (4) M4 socket head screws and (4) washers, as shown. And then, insert the tubing cap on the tube opening. 2. TV with 100x100mm mounting hole pattern: Step 1 If the mounting hole pattern on your TV is 75x75mm, you have to install the VESA bracket (packed with hardware kit) onto your TV with (4) M4 socket head screws, as shown. Step 2 Install your TV onto the VESA bracket with (4) M4 ACORN nuts and (4) washers, as shown. STAR TRAC UNIVERSAL TV BRACKET INSTALLATION STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 P/N: 620-7841, Rev. B STAR TRAC E&S SERIES UNIVERSAL PVS INSTALLATION MANUAL 15 ...
Ce manuel est également adapté pour les modèles :Formateurs - E-RB (314.88 kb)
Formateurs - S-RB (314.88 kb)
Formateurs - S-TBT (314.88 kb)