Évaluations - 4, GPA: 3.8 ( )

Fabricant : Star Trac Taille : 2.62 mb Nom Fichier : Langue d'enseignement:

(i.e., an antenna or cable system). Select Air if using VHF/UHF antenna, select Cable if using Cable TV. Signal Strength (Only for digital programs) You can check the DTV signal strength to determine if you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. Auto Scan Select to automatically search for all channels available and store them in memory. 1. In Channel menu, select Auto Scan item, press VOL+ to start auto scan. 2. During auto channel search, your unit searches for digital channels first. When the digital channel search is complete, a confirmation box appears asking if you want to scan analog channels. Press OK or wait for some seconds to continue searching for analog channels. (Press VOL+ to select Cancel, and press OK to stop searching for channels.) 620-7991 Rev 002 Adjusting Channel Menu Options (Continued) Option Description Add On CH Select to manually search for channels that Search can not be memorized. 1. In Channel menu, select Add On CH Search item, press VOL+ to access. 2. During Add On CH search, your unit searches for digital channels first. When the digital channel search is complete, a confirmation box appears asking if you want to scan analog channels. Press OK or wait for some seconds to continue searching for analog channels. (Press VOL+ to select Cancel, and press OK to stop searching for channels.) Channel Editor Lets you delete channels from the channel list so your unit skips the channels when you press CH+/-button. You can still tune to the channel using the number buttons. 1. In Channel menu, select Channel Editor item, press VOL+ to access. 2. Press CH+/-to select the channel you want to edit. Press VOL+/-to select viewable to show the channel and select not viewable to hide the channel. Channel Labels If a channel is not already labeled, you can label the channel to make it easier to identify. Also you can rename the channel already labeled. 1. In Channel menu, select Channel Labels item, then press VOL+ to open the channel labels screen. 2. Press VOL+/-to select the channel number you want to label. 3. Press CH-to move to the channel label field, then press OK to access. Press CH+/to select a character, then press VOL+/-to move to the next/previous character. Repeat this step to add more characters. 4. After finishing inputting, press OK to confirm. And the cursor will move to Save. 5. Press OK to save the setting or press CH- to select Preset and press OK to reset most setting of current source to Channel Labels default settings. 620-7991 Rev 002 SETTING UP YOUR PERSONAL VIEWING SCREEN (PAL) SETTING UP YOUR PERSONAL VIEWING SCREEN (PAL) Basic Operations Turning On / Off the Power Turning On Press the button on the control module, the unit will be turned on and you will be ready to use its features. Turning Off With the power on, press the button on the control module to turn off the unit. Note: • When selecting AV mode, the button can not work. If you want to turn off the unit, please select DTV/ ATV mode first. Selecting the Input Signal Source Press the INPUT to select desired input source. Options include: • ATV -Watch analog TV. • DTV -Watch digital TV. • iPod -Listen to your iPod or watch a movie or other video from your iPod on the PVS screen. • USB -Listen to music from your USB device. Notes: • In DTV / ATV mode, when there is no signal input for 30 seconds, the unit will turn off the back light automatically. Once you press any button (except button) on the control module or the unit receives a signal input, the unit will display normally. • In AV mode, when there is no signal input for 30 seconds or the unit only plays audio, the unit will turn off the back light automatically, once the unit receives a signal input or you press CH+/-or INPUT button on the control module, the unit will display normally. • When there is no operation within 15 seconds, the on-screen menu will disappear from the screen automatically. Channel Selection You can use the following ways to change channels: • Press CH+ or CH-to go to the next or previous channel. The skipped channels can't be selected. • Press the number buttons ( 0 -9) to directly select any channel you want then press OK. • To go to the previous channel viewed, press the button. Note: • TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new unit is capable of receiving both traditional analog channels and digital channels. • By using 0 – 9 number buttons, you can not select analog channels in DTV mode, or digital channels in ATV mode. • If you input one digit or two-digit channel number, you can press OK to go directly to the channel without waiting. 620-7991 Rev 002 Adjusting Picture Menu Options Customizing the Picture 1. Press VOL+, CH+ and number button [3] at the same time and the main menu screen displays. 2. Press VOL+/-to select Picture menu, press CH-to access the menu. 3. Within the m...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :