Log:
Évaluations - 4, GPA: 4.3 ( )

Instructions Keys Fitness, Modèle KF-FI

Fabricant : Keys Fitness
Taille : 1012.14 kb
Nom Fichier : f41ce6db-fc9f-49d5-839b-36c65d668603.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Keys Fitness assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Help line. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at within 10 days of purchase. KEYS FITNESS Series Model: KF-FI QUESTIONS? CALL 1-888-340-0482 Monday-Friday 8:30-5:30 Central Time When calling please have the following product information available: Model Name : Date Mfg.: PO # : Serial #: Model Name Decal Location Important Safety Information Prior to assembly, remove components from the box and verify that all the listed parts were supplied. NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Read all precautions and instructions in this manual before using this equipment. WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s Manual and are familiar with safety information and precautions. SAFETY PRECAUTIONS • This unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. • Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! • Always examine your unit before using to ensure all parts are in working order. • Do not leave children unsupervised near or on the unit. • Service to your unit should only be performed by an authorized service representative, unless authorized and/or instructed by a Keys Fitness technician. Failure to follow these instructions will void the warranty. Assembly Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Connect Main Frame (1) to U-Shaped Base (3) with Bolts (28), Washers (32) and Nylon Lock Nuts (34). Insert Slide Frame (7) onto Main Frame (1). Connect Main Frame (1) to Rear Upright (2) with Bolt (27), Washers (31) and Nylon Lock Nut (33). Make sure that transport wheels face away from the unit as pictured. Attach Seat Pin (10) and Spring (12) to Main Frame (1) with Washer (32) and Locknut (34). STEP 1 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Connect Seat Pad (8) to Seat Support (4) using Bolts (26) and Washers (31). Connect Seat Support (4) to Main Frame (1) as pictured using Bolt (30), Washers (32) and Nylon Lock Nut (34). STEP 2 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. First attach Back Support Tubes (5) to Main Frame (1) using Screw Shaft (23), Washers (32), and Nylon Lock Nuts (34). Attach Back Pad Support (6) to Back Pad Support Tubes (5) and Slide Frame (7) using Screw Shaft (23), Washers (32), and Nylon Locknuts (34) as pictured. Attach Back Pad (9) and Lower Back Pad (36) to Back Support Tubes (5) with Bolts (25) and Washers (31). STEP 3 Parts List KF-FI Parts list Rev ARef #Part #descriptionQty1 3-00999MAIN FRAME, KF-FI1 3-01000REAR BASE, KF-FI13 3-01001U FRONT BASE, KF-FI14 3-00108BACK SUPPORT KPS-FI15 19-000 1BACK PAD SUPPORT KPS-FI 19-00590BACK PAD FRAME, ADJ.17 19-00049SLIDE FRAME KPS-FI18 8-00 30SEAT PAD, KF-FI19 8-00 9BACK PAD, UPPER KF-FI110 10-00009PIN111 0 -000 IRON BUSHING, 5X1 . X8101 0 -00118SPRING113 0 -0039 FOOT CAP, RIGHT 50.8 KF SERIES414 0 -00114PLASTIC SLEEVE, 50.8x44.5115 0 -004 7BALL HEAD, KF-OB11 0 -00 77RUBBER BUMPER, KPS-FI117 0 -003 7PLASTIC SLEEVE, 3.5X88.9-50.8X7 . 18 0 -00001PLUG 50.8*7 . 19 0 -00 38ROUND INNER PLUG 5 0 0 -0000 PLUG 40*801 1 0 -00105KNOB BOLT1 0 -0003 WHEEL 3 0 -005 5SHAFT BOLT, KPS-FI 4 10-00 57POP PIN (LOCKING), KF-45/KF-AAB1 5 0 -00 58SCREW, BUTTON HEAD SOCKET CAP M10X4510 0 -00 37SCREW, M10X70 BUTTON HEAD SOCKET CAP 7 0 -00 90SCREW, BUTTON HD SOCKET CAP M10X901 8 0 -00 87SCREW, BUTTON HD SOCKET CAP M1 X80 9 0 -00 85SCREW, BUTTON HD SOCKET CAP M1 X90130 0 -00 39SCREW, M1 X1 5 BUTTON HEAD SOCKET CAP131 0 -00 35WASHER, 11X 0X1.51 3 0 -00 WASHER, 13X X KPSFI #3 1333 0 -00091NYLON NUT, M10334 0 -0009 NYLON NUT, M1 935 0 -00393FOOT CAP, LEFT 50.8 KF SERIES43 8-00 8BACK PAD, LOWER KF-FI137 0 -00 3 SCREW, M8X 5 BUTTON HEAD SOCKET CAP838 0 -00094WASHER 8, 9* 8* 839 0 -00391SQUARE PLUG, 50.8 KF SERIES4 Exploded View 10 Warranty Information KEYS...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories