Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
2. Only one person at a time should use the machine. 3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY. 4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors. 5. Keep hands away from all moving parts. 6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine. 7. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer. 8. Do not place any sharp object around the machine. 9. Disabled person should not use the machine without a qualified person or physician in attendance. 10. Before using the machine to exercise, always do stretching exercises to properly warm up. 11. Never operate the machine if the machine is not functioning properly. 12. A spotter is recommended during exercise. WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. 2 3 ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach the Main Frame (#33) to the Rear Stabilizer (#22). Secure it with two M10 x 3 .” Carriage Bolts (#23), . .” Washers (#5) and M10 Aircraft Nuts (#30). Repeat the same step to install the Front Stabilizer (#38). B.) Attach the Seat Pad (#17) to the Seat Support (#18). Secure it with two M8 x 1 3/8” Allen Bolts (#45) and . .” Washers (#15). Attach the Seat Frame (#18) to the Main Frame (#33). Secure it with two M10 x 3 .” Carriage Bolts (#29), . .” Washers (#5) and M10 Aircraft Nuts (#30). C.) Attach the Foot Plate (#31) to the Main Frame (#33). Secure it with three M10 x 1” Allen Bolts (#11) and . .” Washers (#5). DIAGRAM 1 4 STEP 2 (See Diagram 2) A.) Attach two Axle Spacers (#25) to the pivot on the rear of the Calf Raise Frame (#4). Insert the Axle (#24) through the pivot and then attach the pivot to the bracket on the Seat Support (#18). Secure it with two M10 x 1” Allen Bolts (#11) and . 1 3/8” Washers (#19). B.) Attach the Calf Raise Bar Holder (#28) to the bracket on the side of Main Frame (#33). Secure it with one M10 x 2” Allen Bolt (#37), two . .” Washers (#5), and one M10 Aircraft Nut (#30). C.) Attach the Olympic Sleeve (#2) to the weight post on the Calf Raise Frame (#4). Secure it with one M8 x .” Allen Screw (#3). Attach the Spring Clip (#1) to the Olympic Sleeve. DIAGRAM 2 5 STEP 3 (See Diagram 3) A.) Attach the two Calf Pads (#12) to the Knee Support Frame (#16). Secure each pad with two M8 x 2” Allen Bolts (#14) and . .” Washers (#15). B.) Attach the Height Adjustment Frame (#9) to the Calf Raise Frame (#4). Secure it with one M10 x 3” Allen Bolt (#6), two . .” Washers (#5), and one M10 Aircraft Nut (#30). C.) Attach Knee Support Frame (#9) to the Height Adjustment Frame (#9). Insert the Lock Knob (#10) to the hole to obtain the desired height for the Calf Pads. DIAGRAM 3 6 EXPLODED DIAGRAM 7 PARTS LIST KEY NO. DESCRIPTION Q’ty Spring Clip 1 Olympic Sleeve 1 M8 x .” Allen Screw 1 Calf Raise Frame 1 . .” Washer 13 M10 x 3” Allen Bolt 1 Large Bumper 1 Brass Bushing 2 Height Adjustment Frame 1 Lock Knob 1 M10 x 1” Allen Bolt 5 Calf Pad 2 1” x 2” End Cap 2 M8 x 2” Allen Bolt 4 . .” Washer 10 Knee Support Frame 1 Seat Pad 1 Seat Support 1 . 1 3/8” Washer 2 Handle Grip 2 Stabilizer End Cap 4 Rear Stabilizer 1 M10 x 3 .” Carriage Bolt 4 Axle 1 Axle Spacer 2 Bearing 2 Rubber Pad 1 Calf Raise Bar Holder 1 M10 x 3 .” Carriage Bolt 2 M10 Aircraft Nut 8 Foot Plate 1 2” x 2” End Cap 1 Main Frame 1 Small Bumper 2 Spring 1 Spring-bar 1 M10 x 2” Allen Bolt 1 Front Stabilizer 1 Roller Wheel 2 M8 x 1 5/8” Allen bolt 2 M8 Aircraft Nut 2 2” x 2 .” End Cap 1 Spring Clip Sleeve 2 M10 x 1” Round Allen Bolt 4 M8 x 1 3/8” Allen Bolt 2 8 IRON GRIP SPORT By IMPEX FITNESS PRODUCTS LIMITED LIFE TIME WARRANTY IMPEX FITNESS PRODUCTS ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of LIFE TIME on the Frame and Weld, 3 YEARS on parts, and 6 MONTHS on upholstery from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All frei...