Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
4 1 908006 Top Pole Section 5 1 908107 Middle Pole Section 6 1 908005 Bottom Pole Section 7 2 206934 Large Eyebolt, 3/8” 8 2 203063 Nylon Insert Lock Nut, 3/8-16 9 1 206634 Rod, 1/2 x 9-1/2 Long 10 1 203099 Nut, Ny-lock, 5/16-18 11 4 201681 Spacer, Plastic .530 I.D. x .88 Long 12 1 202662 Bolt, Hex Head, 5/16-18 x 4-1/2 Long 13 2 200341 Nut Cover 14 5 203100 Hex Flange Nut 5/16-18 15 1 204832 Bracket, Pole Mount 16 2 203053 Carriage Bolt, 5/16-18 x 4 Long 17 4 203232 Washer, Metal, 3/4” O.D. 18 4 201124 Lock Nut, 3/8-16 19 4 206360 Bolt, Hex Head, 3/8-16 x 2-5/8 Long 20 2 204858 Spacer, Plastic Biscuit 21 2 204857 Spacer, Metal 1/2” O.D. x 1.44 Long 22 2 204859 Cover, Pin Slide 23 1 203038 Carriage Bolt, 5/16-18 x 2-3/4 Long 24 1 204850 Pin, Locking 25 1 204853 Lanyard, Black Coil 26 4 201683 Spacer, .530 I.D. x 1.5 Long 27 2 900964 Bracket, Backboard Support 28 2 200874 Spacer, Steel .402 I.D. x .5 O.D. x 1.5 Long 29 6 206244 Bolt, Hex Head, 1/2-13 x 8 Long 30 4 201642 Spacer, Plastic, .530 I.D. x .625 Long 31 7 206340 Lock Nut, Hex Head, 1/2-13 32 2 904820 Elevator Tube, Lower - Long 33 1 204837 Spring, Counter Balance 34 1 900235 Rim 35 2 904808 Elevator Tube, Upper - Short 36 2 201682 Spacer, .530 I.D. x 1.875 37 2 900867 Plate, Triangle, (Black) 38 1 207103 Cap, Pole Top 39 2 200520 Screw, #8 x 1/2 40 1 202605 Bolt, Hex, 1/2-13 x 4.25 Long 41 1 206219 Plug, Tank Cap 42 12* 201219 Net Clip, (White) 43 1 204290 Net 44 1 204444 Black Nylon Rope 45 1 203124 Stake, Tie Down 46 1 201252 Label, Height Adjustment and Moving 47 6 203309 Washer, .406 I.D. x 1 O.D. Flat 48 4* 205528 Bolt, Hex Flange, 5/16-18 x 1 Long 49 1 206990 Reinforcement Bracket WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE NUMBER: U.S. 1-800-558-5234; CANADA: 1-800-284-8339; 7 03/04 P/N 214636E HARDWARE IDENTIFIER (BOLTS & SCREWS) Item #48 (4) * You may have extra parts with this model. Item #7 (2) Item #40 (1) Item #50 (2) Item #23 (1) Item #29 (6) Item #16 (2) Item #12 (1) 8 P/N 214636E 03/04 HARDWARE IDENTIFIER (STEEL SPACERS) Item #21 (2) Item #28 (2) HARDWARE IDENTIFIER (NUTS & WASHERS) Item #14 (11) Item #10 (1) Item #17 (4) Item #31 (7) Item #8 (2) Item #18 (4) Item #47 (6) HARDWARE IDENTIFIER (PLASTIC SPACERS CAPS & CLIPS) Item #30 (4) Item #20 (2) Item #11(4) Item #42 (12)* Item #26 (4) Item #13 (2) 9 P/N 214636E Item #36 (2) 03/04 SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this section: TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) And/Or: Item #50 Item #23 Item #16 Item #12 (1) Item #19 Item #21 Item #13 Item #20 Item #18 Item #14 Item #10 Item #8 Item #19 Item #47 1/2” 9/16” Wrenches (2) 1/2” (2) 3/4” (2) Socket Wrenches and Sockets Extension Phillips- Head Screwdriver 10 P/N 214636E 03/04 1A. 1A. Check the following pre-assembled base areas for tightness: Eye bolts P/N 203452, Washer P/N 203218, Nut P/N 203100, Carriage Bolts P/N 203223 . Eye bolts P/N 203452 Washer P/N 203218 Nut P/N 203100 Front Cover P/N 203218Pole Bracket P/N 201581 Carriage Bolts P/N 203223 Hex Flange Nut P/N 203100 Washer P/N 203218 Base P/N 206620 11 03/04 P/N 214636E 1B. 1B. Check the following pre-assembled handle areas for tightness: Screw P/N 2048032, Nut P/N 203100, Carriage Bolts P/N 203103 . Carriage Bolt P/N 203103 Nut P/N 203100 Nut P/N 203100 Handle, Right P/N 204856 Handle, Left P/N 204855 Screw P/N 204803 Carriage Bolt P/N 203103 Height Adjustment Rod P/N 904833 Label,Height Indicator P/N 204872 Label,Height Indicator P/N 204872 12 P/N 214636E 03/04 2. 2. Mark pole sections with tape (not supplied) as shown. 3. While maintaining alignment, bounce middle pole section (5) 6 5 4 Tape (Not Supplied) WOOD SCRAP (NOT SUPPLIED) 5 4 into top section (4) using a wood scrap as shown until the top pole no longer moves toward the taped reference mark on the middle pole. Upright assembly. Center alignment slot of middle pole section (5) in a lower hole of top pole section (4) as shown. IMPORTANT!: POLE SECTIONS SHOULD HAVE A 3-1/2" (9 CM) MINIMUM OVERLAP. NOTE: 13 03/04 P/N 214636E 4. 4. Bounce top (4) and middle (5) pole assembly onto bottom pole section (6) using a wood scrap as shown. Bounce until the top and middle pole assembly no longer moves toward the taped reference mark on the bottom pole. IMPORTANT!: Holes in top (4) and bottom pole (6) sections MUST align to correctly position elevator system toward playing surface. POLE SECTIONS SHOULD HAVE A 3-1/2" (9 CM) MINIMUM OVERLAP. NOTE: 4 5 6 WOOD SCRAP (NOT SUPPLIED) RODS SHOWN ARE FOR VISUAL REPRESENTATION OF ALIGNMENT AND ARE NOT SUPPLIED WITH THE HARDWARE 5. Install bolt (12) through bracket and bottom pole section (6) and secure with nut (10) as shown. Nut should be ti...