Log:
Évaluations - 2, GPA: 3 ( )

Instructions Image, Modèle HGTL09110C

Fabricant : Image
Taille : 1.6 mb
Nom Fichier : 2b01519c-4da1-4ff3-a006-ea350b53884b.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


To restart the program, press the Start button or the Speed + button. After a moment, the walking belt will begin to move at 1.0 mph. When the next “chirp” is heard, the speed and incline will change to the next settings of the program. When the program is completed, the walking belt will stop and the Time/Segment Time display will begin to flash. Note: To use another program, press the Stop button and go to step 5. Note: If the speed or incline of the treadmill does not change when a “chirp” is heard, make sure that the iFIT.com indicator is lit and that the Time/Segment Time display is not flashing. In addition, make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord. Follow your progress with the LED track and the displays. See step 5 on page 10. When the program is completed, remove the key from the console. See step 6 on page 13. 19 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode. To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following information will be shown: The Distance/Incline/Laps display will show the total number of miles that the walking belt has moved. The Time/Segment Time display will show the total number of hours the treadmill has been used. An E, for English miles, or an M, for metric kilometers, will appear in the Speed/Min-Mile display. Press the Speed + button to change the unit of measurement. IMPORTANT: The Calories/ Fat Calories/Heart Rate display should be blank. If a “d” appears in the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a “d” appears in the Calories/Fat Calories/Heart Rate display when the information mode is selected, press the Speed – button so the display is blank. To exit the information mode, remove the key from the console. THE OPTIONAL CHEST PULSE SENSOR An optional chest pulse sensor adds even more features to the console. The chest pulse sensor offers hands-free operation and continuously monitors your heart rate during your workouts. To purchase the optional chest pulse sensor, call toll-free 1-800-7342377. 20 21 HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be damaged. Next, UNPLUG THE POWER CORD FROM THE FRONT OF THE TREADMILL. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Pull the console latch to the right and rotate the console base to the storage position. (Note: It may be helpful to push down on the right handrail as you pull the console latch.) Release the console latch, making sure that the console base is locked in the storage position. Next, hold the treadmill with your hands in the locations shown. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position. 2. Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the storage latch to the left and hold it. Raise the treadmill until the catch plate is past the pin on the storage latch. Slowly release the storage latch. Make sure that the pin is securely holding the catch plate as shown. To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit. HOW TO MOVE THE TREADMILL Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the pin on the storage latch is securely holding the catch plate. 1. Hold the handrails as shown and place one foot against one of the wheels. 2. Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Note: If the power cord from the cabinet is connected to the treadmill, roll the treadmill no more than six feet from the cabinet. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the tre...

Ce manuel est également adapté pour les modèles :
Formateurs - HGTL09110M (1.6 mb)
Formateurs - HGTL09110O (1.6 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories