Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
2 Press INDEX and ERASE at the same time for more than a second. The index number and "ErASE" flashes for 10 seconds. 3 While the display is flashing, press ERASE. The notes are then combined and unit returns to the normal mode. To cancel Erasing Press pSTOP before step 3. Changing LIGHT DISPLAY The display changes as follows every time you press DISPLAY. After 10 seconds without pressing any button, the unit returns to clock display. Recorded date Time counter .. Recordable time . Notes • Recordable time varies depending on if SP or LP is selected. • " – – – – " is displayed instead of: –– the clock display when you have not set the clock. –– the recorded date of the note when you have not set the clock. –– the recorded date when you have not recorded any note. To see the display in a dark place Press LIGHT and the display is lit. To turn off the light, press LIGHT again. If you do not operate the unit for 10 seconds while the light is on, the light turns off automatically. Cutting the Beep You can cut off The alarm still sounds pppppSTOP MENU/NEXT =/+=/+=/+=/+=/+ 1 Press MENU/NEXT repeatedly until "bEEP" appears. 2 Press + or = to select "OFF" . 3 Press pSTOP to return to the normal display. What beep sound means Beep Patterns Means – (single tone) Usual mode – – (double tone) Enter/exit special mode – – – (triple tone) Notice* * This pattern lets you know the procedure is wrong or informs you of some messages, such as: –– you are trying to record a note when you have already recorded up to the maximum recordable time. –– the unit has stopped functioning due to lack of battery power. To retrieve the beep sound Select "On" on step 2. z Additional Precautions On power Operate the unit only on battery. On the unit • Do not leave the unit in a location near subject to direct sunlight, excessive dust • Should any solid object or liquid fall into batteries and have the unit checked by qualified operating it any further. Keep personal credit cards using magnetic coding or watches, etc., away from the unit to prevent possible damage the magnet used in the speaker. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Troubleshooting Should any problem persist after you have made these checks, consult your nearest Sony dealer. The unit does not operate. m The battery has been inserted with incorrect polarity. m The battery is weak. m The battery compartment lid is not closed completely. m The buttons are locked with the HOLD switch. No sound comes from the speaker. m The earphone is plugged in. m The volume is turned down completely. "FULL" appears even before the unit has reached the maximum recording time and you cannot record. m When you have recorded 99 notes in a file, "FULL" appears regardless of the total recorded time. To continue recording, erase unnecessary notes or index marks. "FULL" appears even before the unit records 99 notes in a file and you cannot record. m When...