Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Document Outline
- Contents
- About this Guide
- Chapter 1: CLI Command Introduction
- Chapter 2: CLI Command Descriptions
- ADD ASSOCIATIONS
- ADD CONCATSETS
- ADD CONNECTIONS
- ADD DISKS
- ADD MIRRORSETS
- ADD PASSTHROUGH
- ADD RAIDSETS
- ADD REMOTE_COPY_SETS
- ADD SNAPSHOT_UNITS
- ADD SPARESETS
- ADD STRIPESETS
- ADD UNITS
- Syntax
- Parameters
- Switches
- Table 4: ADD UNITS Switches for New Containers
- ENABLE_ACCESS_PATH= (default) DISABLE_ACCESS_PATH=
- MAX_READ_CACHED_TRANSFER_SIZE=n MAX_READ_CACHED_TRANSFER_SIZE=32 (default)
- MAX_WRITE_CACHED_TRANSFE_SIZE=n MAX_WRITE_CACHED_TRANSFER_SIZE=32 (default)
- MAXIMUM_CACHED_TRANSFER_SIZE=n MAXIMUM_CACHED_TRANSFER_SIZE=32 (default)
- PARTITION=partition-number
- PREFERRED_PATH=OTHER_CONTROLLER PREFERRED_PATH=THIS_CONTROLLER NOPREFERRED_PATH (default)
- READ_CACHE (default) NOREAD_CACHE
- READAHEAD_CACHE (default) NOREADAHEAD_CACHE
- RUN (default) NORUN
- WRITE_PROTECT NOWRITE_PROTECT (default)
- WRITEBACK_CACHE NOWRITEBACK_CACHE
- Examples
- See Also
- CLEAR_ERRORS CLI
- CLEAR_ERRORS controller INVALID_CACHE
- CLEAR_ERRORS device-name UNKNOWN
- CLEAR_ERRORS unit-number LOST_DATA
- CLEAR_ERRORS unit-number UNWRITEABLE_DATA
- CONFIGURATION RESET
- CONFIGURATION RESTORE
- CONFIGURATION SAVE
- CREATE_PARTITION
- DELETE association-set-name
- DELETE concatset-name
- DELETE connection-name
- DELETE container-name
- DELETE FAILEDSETS
- DELETE remote-copy-set-name
- DELETE SPARESETS
- DELETE unit-number
- DESTROY_PARTITION
- DIRECTORY
- EXIT
- HELP
- INITIALIZE
- LOCATE
- MIRROR
- POWEROFF
- REDUCE
- REINITIALIZE container-name
- RENAME
- RESTART controller
- RETRY_ERRORS unit-number UNWRITEABLE_DATA
- RUN
- SELFTEST
- SET association-set-name
- SET concatset-name
- SET connection-name
- SET controller
- Syntax
- Parameter
- Switches
- Table 6: SET controller Switches
- ALLOCATION_CLASS
- CACHE_FLUSH_TIMER=n CACHE_FLUSH_TIMER=10 (default)
- COMMAND_CONSOLE_LUN NOCOMMAND_CONSOLE_LUN
- CONNECTIONS_LOCKED CONNECTIONS_UNLOCKED (default)
- DEFAULT_ACCESS=ENABLE (default) DEFAULT_ACCESS=DISABLE
- IDENTIFIER=n NOIDENTIFIER
- MIRRORED_CACHE NOMIRRORED_CACHE
- NODE_ID=nnnn-nnnn-nnnn-nnnn xx
- PORT_1_AL_PA=n PORT_2_AL_PA=n
- PORT_1_TOPOLOGY=FABRIC PORT_2_TOPOLOGY=FABRIC
- PORT_1_TOPOLOGY=LOOP_HARD PORT_1_TOPOLOGY=LOOP_SOFT PORT_1_TOPOLOGY=OFFLINE PORT_2_TOPOLOGY=LOOP_HARD PORT_2_TOPOLOGY=LOOP_SOFT PORT_2_TOPOLOGY=OFFLINE
- REMOTE_COPY=node-name NOREMOTE_COPY
- SCSI_FAIRNESS=DISABLE (default) SCSI_FAIRNESS=ENABLE
- SCSI_VERSION=SCSI-2 (default) SCSI_VERSION=SCSI-3
- SMART_ERROR_EJECT=SMART ERROR EJECT
- TERMINAL_PARITY=ODD TERMINAL_PARITY=EVEN NOTERMINAL_PARITY (default)
- TERMINAL_SPEED=baud-rate TERMINAL_SPEED=9600 (default)
- TIME=dd-mmm-yyyy:hh:mm:ss
- UPS=NODE_ONLY UPS=DATACENTER_WIDE NOUPS
- Examples
- See Also
- SET device-name
- SET DISABLE_MANAGERS
- SET EMU
- SET ENABLE_MANAGERS
- SET FAILEDSET
- SET FAILOVER COPY=controller
- SET mirrorset-name
- SET MULTIBUS_FAILOVER
- SET NOFAILOVER
- SET NOMULTIBUS_FAILOVER
- SET RAIDset-name
- SET remote-copy-set-name
- Syntax
- Parameters
- Switches
- ADD=remote-node-name\target-unit-name
- ERROR_MODE=FAILSAFE ERROR_MODE=NORMAL (default)
- INITIATOR=initiator-unit-name
- OPERATION_MODE=SYNCHRONOUS (default) OPERATION_MODE=ASYNCHRONOUS
- OUTSTANDING_IOS=n (1 to 240; default is 200)
- REMOVE=remote-node-name/target-unit-name
- RESUME=remote-node-name/target-unit-name
- SUSPEND=remote-node-name/target-unit-name
- Examples
- See Also
- SET unit-number
- Syntax
- Parameters
- Switches
- Table 8: SET unit-number Switches for Existing Containers
- ENABLE_ACCESS_PATH=connection-names ENABLE_ACCESS_PATH=ALL (default) DISABLE_ACCESS_PATH=connection-names DISABLE_ACCESS_PATH=ALL
- FAKE_PR
- HOST_REDUNDANT NOHOST_REDUNDANT (default)
- IDENTIFIER=n NOIDENTIFIER (default)
- MAX_READ_CACHED_TRANSFER_SIZE=n MAX_READ_CACHED_TRANSFER_SIZE=32 (default)
- MAX_WRITE_CACHED_TRANSFER_SIZE=n MAX_WRITE_CACHED_TRANSFE_SIZE=32 (default)
- MAXIMUM_CACHED_TRANSFER_SIZE=n MAXIMUM_CACHED_TRANSFER_SIZE=32 (default)
- PREFERRED_PATH=OTHER_CONTROLLER PREFERRED_PATH=THIS_CONTROLLER NOPREFERRED_PATH (default)
- READ_CACHE (default) NOREAD_CACHE
- READAHEAD_CACHE (default) NOREADAHEAD_CACHE
- RUN (default) NORUN
- WRITE_PROTECT NOWRITE_PROTECT (default)
- WRITEBACK_CACHE (default) NOWRITEBACK_CACHE
- Examples
- See Also
- SHOW ASSOCIATIONS
- SHOW association-set-name
- SHOW concatset-name
- SHOW CONCATSETS
- SHOW connection-name
- SHOW CONNECTIONS
- SHOW controller
- SHOW DEVICES
- SHOW DISKS
- SHOW disk-name
- SHOW ELEVATION_INFO
- SHOW EMU
- SHOW FAILEDSETS
- SHOW ID
- SHOW MANAGERS
- SHOW mirrorset-name
- SHOW MIRRORSETS
- SHOW PASSTHROUGH
- SHOW raidset-name
- SHOW RAIDSETS
- SHOW REMOTE_COPY_SETS
- SHOW remote-copy-set-name
- SHOW SPARESETS
- SHOW STORAGESETS
- SHOW stripeset-name
- SHOW STRIPESETS
- SHOW unit-number
- SHUTDOWN controller
- SITE_FAILOVER
- UNMIRROR
- WWID_ASSIGN storageset LUN_WWID=
- Glossary
- Index