Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
HP StoreEasy 1000 Storage
Use Table 1 (page 1) to document your network
Table 2 Validation tests (continued)
information before proceeding with system setup.
Quick Start Guide
Supported storage systems
Successful?
Table 1 Network information
Test
Command(s) to execute
(Y/N)
These installation instructions apply to the following HP
Ping the domain
ping
Fully qualified DNS
controller from the
address>
Network device
name (FQDN)
IP address
StoreEasy system.
ping
Read this document first.
StoreEasy model
Platform
System
name>
HP StoreEasy 1430 Storage
HP ProLiant DL320e Gen8 server
iLO
Verify the network
pingpath
HP StoreEasy 1530 Storage
HP ProLiant ML310e Gen8
controller and DNS
server
Restrictive Active Directory environments
pingpath
controller name>
HP StoreEasy 1630 Storage
HP ProLiant DL380e Gen8 server
If the StoreEasy system is placed in a restrictive Active
pingpath
address> (Repeat for each DNS
HP StoreEasy 1830 Storage
HP ProLiant DL380p Gen8 server
Directory objects or certain administrative permissions.
server)
See the following Microsoft articles for more information:
pingpath
•
How to Create a Cluster in a Restrictive Active
name> (Repeat for each DNS
the HP StoreEasy 1000 Storage QuickSpecs available
Directory environment
server)
at:
•
Failover Cluster Step-by-Step Guide: Configuring
http://www.hp.com/go/StoreEasy1000
Additionally, HP recommends that you also verify the
Accounts in Active Directory
iLO IP address and name resolution; however, this is not
For general information about HP ProLiant Gen8 servers,
critical to support a file server.
go to:
http://www.hp.com/go/proliantgen8/docs
Validate network information
IMPORTANT:
Included with your storage system
Confirm that the IP address and names are not already
Install the storage system hardware
is the HP Storage System Recovery DVD. This DVD
in use.
1.
Install the rail kit by following the HP Rack Rail Kit
is used to restore the system to factory defaults.
Installation Instructions, which is packaged with the
Keep this DVD in a safe place.
Complete the tests in Table 2 (page 1) to verify network
connectivity. Consult with your network administrator to
rail kit.
The Microsoft Windows Storage Server 2012 Standard
confirm test results.
NOTE:
If you ordered the HP Tower to Rack
Edition operating system is preinstalled and activated
Table 2 Validation tests
Conversion Tray Universal Kit for the purpose
on all systems.
of installing the HP StoreEasy 1530 Storage
Successful?
tower model in a rack, use the provided
Test
Command(s) to execute
(Y/N)
tower-to-rack conversion kit installation
Record network information
Ping the IP address ping
instructions to install the tower hardware into
of the StoreEasy
the rack.
It is critical to have the correct networking information
system from
available before proceeding with the system installation
another system on
the same network.
2.
Install the storage system into the rack.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
and configuration. It may be necessary to pre-stage DNS
Microsoft® and Windows® are U.S. registered trademarks of Microsoft
information. Contact your system administrator to clarify
Ping the IP address ping
Corporation.
network configuration requirements.
of some other
system on the same
Access the storage system
IMPORTANT:
Before joining the StoreEasy
network form the
StoreEasy system.
Use either the direct attach or remote management
system nodes to the Active Directory domain,
method to connect to the storage system.
ensure that there is network connectivity between
Ping the name of
ping
each node and the domain controller.
the StoreEasy
ping
system from
IMPORTANT:
Only the direct attach and remote
another system on
management access methods can be used to
HP Part Number: B7D88-96060
The StoreEasy 1000 requires a minimum of 2 IP
the same network.
Published: June 2013
addresses. These addresses may be statically assigned
install the storage system. After the storage system
Edition: 2
*B7D88-96060*
or assigned by a DHCP server or both. If you are using
Ping the name of
installation process is complete and the server’s
ping
static addressing or a DHCP server that does not
some other system
IP addresses have been assigned, you can then
ping
on the same
automatically update DNS, ensure that both forward
additionally use the remote desktop method to
network form the
and reverse DNS information (A and PTR records) is
access the storage system.
StoreEasy system.
pre-staged in the DNS server.
If you will be adding the StoreEasy system to an Active Directory
domain, some additional tests include:
Page 1
...
données dispositifs de traitement - HP StoreEasy 1430 8TB SATA Storage (132.9 kb)
données dispositifs de traitement - HP StoreEasy 1430 8TB SATA Storage/S-Buy (132.9 kb)
données dispositifs de traitement - HP StoreEasy 1430 12TB SATA Storage (132.9 kb)
données dispositifs de traitement - HP StoreEasy 1430 Storage (132.9 kb)