|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
10 64-bit Fibre Channel Host Bus Adapter Release Notes for Tru64 UNIX and OpenVMS
s For large system configurations (many DS-KGPSA-CAs/devices and
paths) the VMS install CD will not boot. It will hang if no DS-KGPSA-
CAs are in the system; or it will crash (either INCONSTATE or
IOMACHINECHK) if a DS-KGPSA-CA is installed in the system. The
workaround is to perform a conversational boot (boot -fl 0,1) of the CD
and at the sysboot prompt to increase the SYSGEN value of
NPAGEVIR. The recommendation is to initially double the CD default
of 8,388,608 Bytes.
s Rarely, on boots and reboots, a HBA’s port does not come on line. The
workaround is to unplug and then reseat the HBA’s cable. Then run MC
SYSMAN IO AUTO/LOG to bring the port on line. Using the SHOW
DEV DG/MULTIPATH command is a quick way to determine if all of
the paths are there after a boot. OpenVMS plans to provide a TIMA kit
to solve this problem.
s "SHOW DEVICE may fail with a "virtual address space full" error on
systems with more than 2400 Unit Control Blocks (UCBs). In multipath
SCSI and FC configurations, there is a UCB for each path from the host
to every storage device. Note that any procedure that calls SHOW
DEVICE, such as CLUSTER_CONFIG, will also experience this
problem. OpenVMS plans to provide a TIMA kit to solve this problem.
Please refer to the web site http://ftp1.service.digital.com/public/vms/axp/
for availability. In the meantime, these problems can be avoided by
reducing the number of UCBs in the system, by removing host adapters or
storage devices, or disconnecting redundant FC paths."
Upgrading an OpenVMS System to V7.2-1
This procedure is for existing OpenVMS systems being upgraded to V7.2-1
that did not have any DS-KGPSA-BC adapters installed and you are now
adding DS-KGPSA-CA Adapters.
NOTE: This procedure is not be required for upgrading to VMS 7.2-1 if there are existing
DS-KGPSA-BC adapters in the system with a path to the intended system disk.
1. Boot the V7.2-1 installation CD and create a V7.2-1 system disk.
2. Boot the new system disk and install the FC TIMA kit images.
3. Install the DS-KGPAS-CA adapter into the system. Refer to the user
guide for the installation procedure for the DS-KGPSA-CA Adapter.
4. Boot the system from the non-FC system disk.
5. For a FC system disk, perform an image backup from the non-FC
system disk to the targeted FC system.
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP StorageWorks 64-Bit/33-MHz PCI-to-FC HBA Win NT (169.17 kb)