Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
2 Replacing the bracket
5 Connecting the devices
Replace the bracket if you plan to install the adapter in a
low-profile slot.
11314
11313
Remove the two screws on top of the board.
Insert a SCSI cable into a connector on the adapter and
tighten the screws. Attach the other end of the cable to the
first device in the bus. Connect cables between the other
devices in the bus. At ach a terminator to the last device.
Repeat for the other channel if necessary.
Reconnect the power cords. Power up the server and
peripherals.
11315
Use a small, flat screwdriver to remove the four stand-offs
on the external connectors.
6 Installing drivers
Remove the bracket and replace it with the low-profile
bracket. Verify that the new bracket is oriented correctly.
Load the product CD into the host computer. The CD will
Replace the stand-offs to secure the bracket to the board.
display an HTML page. Click the arrow next to Drivers
in the Extras section.
Secure the two screws to the large bracket for future use.
On Windows, double-click the file for your operating
system and then navigate to the extracted the files.
3 Preparing the server
Double-click setup.exe and then click Install.
On Linux, unzip the Linux driver package and follow the
Review the documentation for your host computer to select
installation instructions in the readme.txt file.
an appropriate slot for the adapter.
To download the latest drivers and utilities, go to
Back up al data and perform a normal system shutdown.
www.hp.com/support/u320e.
Power down the server and peripheral devices. Unplug the
power cord from the power outlet and server.
NOTE:
The adapter settings provide excellent performance for a
Disconnect all peripheral devices from the server.
wide range of applications. LUN support is enabled by
default for use with tape libraries. See the User Guide on
the product CD if you need to change the configuration.
4 Instal ing the adapter
WARNING!
To reduce the risk of personal injury from hot surfaces,
7 Validating the SCSI bus
allow the drives and internal system components to cool
before touching them.
For Windows only.
On the product CD HTML page, click the arrow next to
Utilities in the Extras section.
Open the server case.
Double-click win_app_hbautil_330hp.exe to extract
Install the adapter in the selected PCI expansion slot.
the files. Navigate to the location where you extracted the
Consult your computer's documentation if you have
files. Double-click Setup.msi and follow the directions.
questions about how to install cards in your system.
Run the SCSI Domain Validation Utility to test the SCSI bus.
Close the computer case.
See the User Guide on the product CD for details.