Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
HP StorageWorks MSL4048,
MSL8048, and MSL8096 Tape
CAUTION:
Parts can be damaged by electrostatic discharge. Keep parts
Libraries library controller
in electrostatic containers until needed. Ensure you are properly
grounded when touching the library controllers.
replacement
CAUTION:
This part is not hot-pluggable. You must power off the Library
to install or replace this part.
IMPORTANT:
The library controller is a mandatory customer self re-
Do not replace both the chassis and the library controller with
pair part. HP customer self repair (CSR) programs al-
repair components in the same procedure. The firmware will
low you to repair your StorageWorks product. If a
not allow the Library to operate if both components are replaced
at the same time. The Library WWID and serial number are
CSR part needs replacing, HP ships the part directly
saved in the library controller card and within the chassis
to you so that you can install it at your convenience.
robotics controller. When one is replaced, the data from the
For more information about CSR, contact your local
original component is transferred to the repair component.
service provider. For North America, see the CSR
website: www.hp.com/go/selfrepair
1 Preparing to replace the library
controller
The Library configuration settings are saved on the library robotics and
© Copyright 2010 Hewlett-Packard Development Company, L.P.
will be restored automatically when the library controller is replaced.
Before removing the library controller, you may also save the
Fifth edition: March 2010
configuration settings. Refer to the HP StorageWorks MSL2024,
The information in this document is subject to change without notice.
MSL4048, MSL8048, and MSL8096 user and service guide for
instructions on saving configuration settings to a file or USB flash drive
Printed in the US
via the operator control panel (OCP) or to a system file using the remote
management interface (RMI).
www.hp.com
Power off the Library from the front panel. Unplug the AC power cables.
*AH218-96025*
Page 1
... Ce manuel est également adapté pour les modèles :
données dispositifs de traitement - HP MSL Tape Library (317.53 kb)
données dispositifs de traitement - HP MSL2024 0-Drive Tape Library (317.53 kb)
données dispositifs de traitement - HP MSL2024 1 LTO-4 Ultrium 1760 SAS Tape Library (317.53 kb)
données dispositifs de traitement - HP MSL2024 1 LTO-4 Ultrium 1840 Fibre Channel Tape Library (317.53 kb)