Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS CONSUMER SAFETY INFORMATION This product is intended for household use only. This appliance is equipped with a polarized plug. This type of plug has one blade wider than the other. The plug will fit into an electrical outlet only one way. This is a safety feature intended to help reduce the risk of electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way. Use the iron on an ironing board. Ironing on any other surface may damage that surface. Before First Use: • Steam vents should be cleaned • During first use of the iron, it may before first use. Prepare iron for appear to smoke. This will stop and steam ironing, then iron over an does not indicate a defect or hazard. old cloth for a few minutes. This will clean the vents. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. 2 Parts and Features 1. Spray/Blast 2. Adjustable Steam Switch 3. Water Tank Opening 4. Spray Nozzle 5. Water Window 6. Temperature Control Dial 7. Sole Plate 8. Automatic Shutoff Reset Button and Power On Light 9. Heel Rest 10. Cord To Dry Iron 1. Plug in iron. 3. Turn Temperature Control Dial to desired to 0 (the Dry 2. Set the Adjustable Steam Switch temperature. Iron position). Allow 3 minutes for iron to reach desired temperature. 4. To turn iron OFF, turn Temperature Control Dial to O. Unplug iron. 3 To Steam Iron 1. Unplug iron. Using a cup, slowly Opening pour 5 ounces of tap water into water tank opening as illustrated. 2. Plug in iron. 3. Set the Adjustable Steam Switch to desired amount of steam. Turn the Temperature Control Dial to desired setting in the steam range. 4. Allow 3 minutes for the iron to reach desired temperature. 5. To turn iron off, turn Adjustable Steam Switch to 0 (Dry Iron). Turn the Temperature Control Dial to O (OFF). Unplug iron. 6. Empty water from the iron following directions in “Caring for Your Iron.” Water Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. Features (on selected models) Adjustable Steam Switch – Set the switch at 0 to dry iron. Move switch to steam or when using blast. Spray/Steam Selector – Turn knob to select Spray or Steam. On Spray, push to release a fine spray of water for difficult wrinkles in cotton or linen. On Steam, push for an extra blast of steam. Wrap & Snap Cord – When finished ironing, let the iron cool then wrap cord and secure with the Wrap & Snap on the plug. Automatic Shutoff Reset Button – Reset Button After the iron has been on for 1 hour, the orange light will go out and the iron will automatically turn off. To continue ironing, push the Reset Button again and the iron will reset for 1 hour. Power Light – This red light indicates the iron is plugged in. Power Light 4 Fabric Setting Chart Steam Setting To Iron Ironing Instructions Off/O Nylon Dry iron on the wrong side of the fabric. Silk Dry iron on the wrong side of the fabric. Wool Steam iron on the wrong side of fabric. Polyester Iron with fabric still damp. Rayon Iron on the wrong side of fabric. Cotton Iron while still damp using steam and/or spray. Linen Iron on wrong side of fabric while still damp. Troubleshooting PROBLEM THINGS TO CHECK Iron won’t heat. • Is the iron plugged in and the outlet working? Check the outlet by plugging in a lamp. • Is the Temperature Control Dial turned to a fabric setting? • If auto shutoff model, is the Reset Button light illuminated? If not, push to reset. Water is leaking out of the iron. • Do not overfill the water tank. • If steam ironing, is Adjustable Steam Dial in a steam position, the Temperature Control Dial in the steam range, and did the iron have enough time to preheat? • If dry ironing, make sure the Adjustable Steam Dial is in the DRY IRON position. Iron won’t steam. • Check the water level. • Is the Adjustable Steam Dial in the STEAM position? • Has the iron had enough time to preheat? Iron leaves spots on clothing. • ALWAYS empty the water tank of the iron after using. Water left in the tank may discolor clothing and soleplate. Wrinkles not removed. • Check Temperature Control Dial is set to correct fabric. Iron too hot. • Check Temperature Control Dial and set to lower setting. Let iron cool down 5 minutes before continuing. 5 Caring for Your Iron Iron 1. The Water Tank of your iron should be emptied after each use. Turn Temperature Control Dial to O. Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water tank opening. 2. After iron has completely cooled, wrap cord loos...