Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
• Do not use the appliance with wet hands, on a damp floor or when the appliance itself is wet. • Do not touch the plug with wet or damp hands. • Check the cord and the plug regularly for any possible damage. If the cord or plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a hazard. • Do not use the appliance if it is dropped or otherwise damaged or if the cord or plug are damaged. In the case of damage, take the appliance to an electrical repair shop for examination and repair if necessary. • Never attempt to repair the appliance yourself. This could cause an electric shock. • Do not allow the cord to hang over sharp edges and keep it well away from hot objects and naked flames. Remove the plug from the socket only by holding the plug. • For extra protection it is possible to fit the electric household installation with a fault current breaker with a rated breaking current of not more than 30mA. Ask your electrician for advice. • Make sure that there is no danger that the cord or extension cord may inadvertently be pulled or cause anyone to trip when in use. • If an extension cord is used it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur. • This appliance is not suitable for commercial use nor for use in the open air. GB GBGB • Never leave • Children cannot Therefore never • Always remove the is cleaned. • Danger! Nominal voltage is still present the mains socket. • Switch the appliance off before disconnecting from the • Never use the cord to carry the appliance. BEFORE INITIAL USAGE • Remove all packaging material. • Clean the iron base (7) (see Cleaning and Care). • Fill distilled water into the water fill-in opening (9) up to the max marking of the water tank (5). For this, use the measuring cup. (11) . When the measuring cup is filled up to the MAX marking, the water tank will also be filled to the max marking. Do not • Insert the power plug (4) into a designated outlet and set the temperature regulator (6) on the highest temperature setting, MAX/LINEN. The operation display (2) will light up. When this light fades, set the steam selection switch (10) to position and iron on an old piece of cloth to remove possible residue. • With first use, there can be a slight odour or smoke. But this is harmless duration. Make sure there is adequate ventilation. OPERATION Dry ironing • For dry ironing, the water tank does not need to be filled. • To dry iron, set the steam selection switch (10) to position . • Insert the power plug into a designated outlet and turn the temperature regulator (6) clockwise to set the desired temperature. The operation display will light up. As soon as the desired temperature is reached, it will fade out. When the iron surface cools, the operation display will up again, to show that the iron surface is heating up once more. Settings 0 = Off • = Nylon, rayon •• = Wool, cotton ••• MAX = Linen, highest temperature • Before selecting the temperature, read the instruction manual for the iron or the care advice on the tag of the clothing. • Note: If there is no care advice on the piece of clothing, then you should begin ironing with the lowest temperature. With lower temperatures, there will be less steam. Caution: Synthetic fabrics can melt. • Iron the piece of clothing. • To turn off, turn the temperature regulator counter-clockwise to position 0, set the iron upright, and pull out the power plug. 5 6 GB GBGB Steam ironing • Fill the water • Steam ironing can MAX. • Fill water into the water of the steam ironing, the 1/4 filled. • Switch the steam selection (10) to the position. The iron surface must always in an upright position. • Spray function: Press the spray button (1) to moisten a spot to be ironed. will come out of the spray nozzle (8) . • Warning! The steam temperature is very high. materials which will immediately be worn • To turn off, turn the temperature regulator counter-clockwise 0 and pull out the power plug. • Turn the appliance upside down and carefully pour Carefully shake the appliance. • Press the spray button (1) to allow possible remaining water to come out more CLEANING AND CARE • Be sure to read the safety advice beforehand. • To dry the iron, set the temperature regulator to position MAX for 5 minutes. • Turn the iron off as described. • Make sure that the plug is pulled out of the outlet and allow the iron down. • Clean the outside of the appliance with a soft, moist cloth and if necessary, with a mild detergent. • Never use abrasive detergents or hard utensils. • Wipe the iron base with a moist cloth. • If the iron is to be stored, always allow it to completely cool down first. Wrap up the power cable, not around the iron, and keep the iron in a safe place, out of the reach of children. GB GBGB TECHNICAL DATA Operating power: 230 V ~ 50 Hz Power consumption: 1800 W INSTRUCTIONS ON Do not dispose of this product hand it over at a collectio...