Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
056/41 20 54 - Fax 056/41 86 74 (Typewriter comment Part No. D0163) General Information Dear Customer, Please read the instructions for use before first using your ironing machine. These instructions provide important information on safety, use and maintenance of your appliance. They will protect you and prevent damage to the appliance. Keep these instructions for use in a safe place and pass them on to any subsequent owners. This ironer is a domestic appliance and is not intended for commercial industrial use. Transport damages Check the appliance for transport damages immediately. If the appliance has been damaged, do not put the appliance into operation in case of doubt, but contact the dealer or supplier. Disposal of the transport packaging The packaging protects the appliance from transport damages. Environmental compatibility and waste disposal are taken into account when selecting the packaging material; it is therefore recyclable. Recycling the packaging saves on raw materials and reduces waste. Please contact your local council for information on your nearest disposal point; otherwise, your specialist dealer will also accept the packaging. Disposal of your old appliance The old appliance must be made unusable before scrapping, in other words, the power supply cord must be removed. All plastic parts are marked with standard international abbreviations, allowing easy sorting and environmentally-aware recycling when disposing of the appliance. Please contact your local council for information on your nearest disposal point; otherwise, your specialist dealer will also accept the old appliance. Technical assistance In the event of queries and requests for technical information and in the event of faults or if you need a spare part for your appliance, please contact the service point specified in the warranty documents. Please state the precise appliance designation and the serial number, to enable us to help you quickly. The cotton cover of the ironing roller and the pilot light in the main switch are so-called wearing parts and are not included in the warranty. 2 DESCRIPTION The ironer can iron and press. During ironing the roll turns, during pressing the roll is stationary. The footswitch has two working functions and one stationary fonction. In the working position, the ironing plate is swung in, so you can iron or press. In the idle position, the ironing plate is swung away and the roll is stationary. The roller has a complete forwards free movement. The roller is hung up at one side and free at the other. The rotation of the roll is driven by an electric motor. The ironing plate is installed on the pressure arm, which by pressing the footswitch moves towards the roll and by releasing away from the roll. The movement of the ironing plate is operated by a motor and a gearwheel drive. The motor for rotating the roller is installed in the head of the roll. The motor for the tension and releasing is put in in the baseplate. At the left side of the finger guard, a microswitch is installed for the automati swining away of the ironing plate. The footswitch has two microswitches to command the printed circuit board which is installed in the head of the roll. In the baseplate you can find two switches to command the roll to swing in and out. On the ironinghead there is a button to regulate the speed of the rotation. Rotary ironer RI800-16 Technical data for customer service 04/2005 TECHNICAL INFORMATION Standards EN60335-2-44 EN55014-1 EN55014-2 EN61000-3-2 EN61000-3-3 Characteristics VDE-GS VDE-EMC Electrical connection 2780 Watt 220-240V 50 Hz 16 A Dimensions Total height Total depth Total length Working position ca 1020 mm ca 390 mm ca 980 mm Folded ca 1060 mm ca 390 mm ca 590 mm Weigth ca 46 Kg Height (up to the lower part of the base plate) ca 640 mm Roller Length ca 855 mm Roller Diameter ca 160 mm Roller Pressure ca 17.5kg + 0.5kg per mm laundry thickness Rotation Min 8 – max 15 r/pm Distance between 35 - 40 mm Ironing plate and roller (swung away) Quantity of thermostats 2 pcs Heating element 1 x 2580 W Motor load 150 W / 130 W Transmission 1 : 422 / 1 : 85 On/Off switch (rocker switch) 0 - 1 with red pilot light Rotary ironer RI800-16 Technical data for customer service 04/2005 FAULTS SOURCE The temperature of the ironing plate does not correspond with the indicators on the temperature selectors 1. Thermostat defect – to be replaced 2. Temperature sensor is not close enough to the ironing plate. The ironing plate does not heat up 1. The thermostat is on "cold“ 2. The rocker switch is set to "0“ 3. The electrical connection is interrupted 4. Rocker switch defect – to be replaced 5. Thermostat defect – to be replaced 6. Heating element defect 7. Fuse defect – to be replaced Does not iron equally along the whole length 1. Check the tension of the ironing plate and the parallelism with the roll The pressure of the ironingplate is too low. 1. Check the adjustment of the ironing plate and the parallelism ...