Évaluations - 3, GPA: 4 ( )

Fabricant : Braun Taille : 116.8 kb Nom Fichier : Langue d'enseignement:

Photos et spécifications   Braun  PV 2202

Decalcifying / Self- Braun ProGlide-jet (anti-calc. valve) to prevent you to clean residues from Do not use commercial decalcifiers; damage the sole plate. We recommend the self-cleaning function every 1. Turn the steam regulator 4 to the position « • » (= steam off). 2. Fill the water tank to the marking «max.» L and turn the temperature selector 1 to the lll marking («self-cleaning» = SC) (A). 3. Plug the iron into the socket and wait till the pilot light 8 goes off. 4. Unplug the iron and hold it over a sink. 5. Turn the steam regulator 4 clockwise to the end of the red marking (B) and then 6. keep turning it to the double-arrow marking . The steam regulator will lift (C) . 7. Pull out the steam regulator together with the valve vertically (D). Do not touch the lower end of the anci-calc. valve with your fingers, to avoid a possible greasy film. 8. Allow all water to drain through the steam vents in the sole plate, while shaking the iron slightly. (Caution: Hot water and steam come out from the sole plate.) 9. Wait for the sole plate to cool down and then clean it (see «Maintenance and Cleaning»). 10. Make sure that the sole plate is completely dry before storing it. Cleaning the anti-regulator During the time the sole recommend to decalcify the following way: 1. Put a small quantity of white vinegar essence) or lemon juice bowl. 2. Immerse just the bottom part of the valve in the liquid, wait till it is decalcified and carefully brush of remaining residue (E) . Do not use a metal brush. 3. Then, rinse it under running water without touching the lower end of the valve. Re-inserting the steam regulator with anti-calc. valve 1. Re-insert the steam regulator so that the double-arrow aligns with the marking on the iron (F). 2. Then push it down carefully and at the same time turn the button anti-clockwise. 3. Keep turning the button to the marking « • » (= steam off). 4. If your iron has the shot of steam, refill the tank with water, heat the iron up and press the button 7 3 to 4 times in the shot of steam function before ironing, to rinse the iron. ATTENTION: The iron must not be used without the steam regulator and the anti-calc. valve. Ironing Guide To begin ironing, it requiring a lower temperature , and continue with those temperature (e. g. cotton, . Silk and silk-like synthetics tend therefore before using the water test it on an inconspicuous spot first. Fabrics Temperature regulator setting Steam regulator setting Synhetics (acrylic, acetate) l • (= steam off) Silk, rayon, nylon, polyester, cotton blends ll • (= steam off) to max. Wool ll • (= steam off) to max. Cotton lll • (= steam off) to max. Linen lll to max. • (= steam off) to max. Mixed fabrics: Always select the temperature suited for the most sensitive fibre the garment contains. Follow manufacturer’s instructions on the label. Subject to chance without notice. This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC. Guarantee We grant a 1 year commencing on the date Within the guarantee period free of charge, any defects in resulting from faults in material either by repairing, or exchanging exchanging the whole appliance as choose. Not covered by this guarantee: damage arising from improper use or storage (operation with incorrect current/voltage, plugging it into an unsuitabie power point, breakage use o...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :