Évaluations - 6, GPA: 3.8
(
)
)
|
Photos et spécifications Kenwood IC800 |
Facilité d'utilisation
It is extremely dangerous to direct safety the steam towards people or When cleaning, never unscrew the boiler cap whilst the unit is pressurised. Steam will shoot out and burn you. Always switch off, unplug and leave overnight before commencing to clean the boiler. . Don’t get burnt by the iron’s steam, hot water, soleplate or iron rest. . Care should be taken when using the appliance due to the emission of steam. . Keep children away from the steam station. And make sure they can’t grab the cords and pull the steam station down. . Trailing cords are a hazard, keep them out of the way to prevent accidents. . Never iron clothes being worn. . Never put the steam station, cord or plug in liquid – you could get an electric shock. . Always remove the water tank from the steam station when filling from a tap. . Don’t let the power and steam supply cords touch hot parts. . During ironing pauses and after use always place the iron flat on the iron rest of the steam station. . Never leave the steam station on unattended. . Never use a damaged steam station. Get it checked or repaired: see ‘service and customer care’. . Do not use the steam station if it has been dropped, or if there are any visible signs of danger or it is leaking. . Don’t touch the appliance with wet or damp hands. . Always switch off and unplug the steam station before fitting or removing the detachable iron. . Always unplug the steam station when not in use and allow to cool before moving or cleaning. animals. . Only use water with this appliance. . During use, the steam station must be stable and used in a horizontal position. . Never attempt to attach any unauthorised accessories to the steam station. Outlet 19 should only be used with the Kenwood Multicare accessory kit. . Never let the iron touch or rest against the water tank. . This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. . Children should be supervised to ensure that they do not play with the appliance. . Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions. before plugging in Make sure your electricity supply is the same as the one shown on the underside of the steam station. . This iron complies with European Economic Community Directive 89/336/EEC. before using for the first time 1 Remove all packaging and any stickers or labels. 2Wind excess cord around the base of the steam station. 2 3Test the iron on an old cloth to make sure the soleplate and water tank are clean. We recommend that you allow steam to disperse by pressing the steam button in order to release any residues that may have built up during the manufacturing process. . Repeat step 3 after prolonged periods of storage. know your Kenwood steam station lock for continuous steam steam button . temperature control with indicator light soleplate water tank cover water tank water tank guard rail iron rest cord cactus locations power supply cord cord storage outlet for detachable iron steam supply cord boiler cap variable steam control low water indicator light on/off button ready to steam indicator light outlet for Multicare accessory kit* . carry handle cord cactus detachable iron PTFE soleplate not illustrated (model IC800 series only) * The Multicare accessory kit model ICK01 is not included with model IC700 series, but can be purchased separately by contacting the shop where you purchased the steam station. using your steam station 1 Fit the detachable iron into it’s socket: Lower the outlet cover, then with the arrow on the connector uppermost, push into the socket until fully home. To remove, squeeze the ribs on either side of the connector and pull out . Never remove the iron by pulling on the cord. 2 Place the steam station on the support of the ironing board or any other stable surface nearby with the iron sitting on the iron rest. Make sure the steam station is unplugged and that the power and steam supply cords are unrolled and not kinked. 3 Fit the cord cactus into one of the cord cactus locations. Place the steam supply cord into one of the grooves on the other end of the cord cactus. This will keep the cord in an upright position. filling with water Either 1 Lift off the water tank cover and fill with water. Replace the cover. Or 2 Remove the tank by lifting off. Lift off the cover, then fill the tank under the tap. Re-fit the cover. Replace the tank into its original position by gently pushing into place. . Filtered water is best as it reduces limescale, prolonging the life of your steam station (Kenwood water filters are widely available). Alternatively use 50% tap water and 50% distilled water. . Do not add anything else to th...
Ce manuel est également adapté pour les modèles :Fers - IC700 (542.76 kb)