Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
2 Optional Features.................................... 5 Parts and Features.................................. 3 Caring for Your Iron ................................ 6 Using Your Iron........................................ 4 Troubleshooting...................................... 7 Fabric Setting Chart ................................ 5 Customer Assistance ............................ 8 We invite you to carefully read this instruction manual before using your appliance. For Customer Assistance in the U.S.A. Please Call: 1-877-207-0923 For Customer Assistance in Mexico Please Call: 01-800-343-7378 840099800 840099800 Ev02 4/9/02 2:05 PM Page 2 IMPORTANT SAFEGUARDS When using your flatiron, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING 1. Use iron only for its intended use. 2. Verify that the voltage in your home corresponds to that of your appliance. 3. To protect against risk of electric shock, do not immerse the iron in water or other liquids. 4. The iron should always be turned to OFF ( O ) before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 6. Always disconnect iron from electrical outlet when filling with water or emptying and when not in use. 7. Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer assistance number for information on examination, repair or electrical or mechanical adjustment. Incorrect reassembly can cause a risk of electric shock when the iron is used. 8. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board. 9. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir. SPECIAL INSTRUCTIONS 1. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS! Consumer Safety Information This product is intended for household If the plug should still fail to fit, contact a use only. qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety This appliance is equipped with a polarized purpose of the polarized plug by modifying plug. This type of plug has one blade wider the plug in any way. than the other. The plug will fit into an electrical outlet only one way. This is a safety Use the iron on an ironing board. Ironing on feature intended to help reduce the risk of any other surface may damage that surface. electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. 2 12 4 8 3 10 9 11 5 12 4 8 3 10 9 11 5 840099800 Ev02 4/9/02 2:05 PM Page 3 Parts and Features 1 2 3 4 5 6 7 8 9 10 11 7 * Feature on selected models. GE Brand Models: Electrical Characteristics: 106822 120V~ 1200W 60Hz 106822R 120V~ 1200W 60Hz 169065 120V~ 1200W 60Hz Before First Use • Steam vents should be cleaned before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. This will clean the vents. • Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses. Automatic Shutoff Reset Button and Light* Spray/Blast Adjustable Steam Switch Water Tank Opening Spray Nozzle Water Window Temperature Control Dial Soleplate Power On Light Heel Rest Cord 6 • During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard. 3 840099800 Ev02 4/9/02 2:05 PM Page 4 Using Your Iron To Dry Iron 1. Plug iron into outlet. 3. Turn Temperature Control Dial to desired to 0 (the Dry 2. Set the Adjustable Steam Switch temperature. Iron position). Allow two minutes for iron to reach desired temperature. 4. To turn iron Off, turn Temperature Control Dial to Off ( O ) and unplug iron. To Steam Iron 1. Unplug iron. Using a cup, slowly Opening pour 6 ounces (3.4 cup) of tap water into water tank opening. Do not fill iron directly from the faucet. 2. Plug iron into outlet. 3. Turn the Temperature Control Dial to desired fabric setting in the steam range. Set the Adjustable Steam Switch to the recommended steam level. See “Fabric Setting Chart” on page 5. 4. Allow two minutes for the iron to reach desired temperature. 5. To turn iron off, set Adjustable Steam Switch to 0 (Dry Iron). Turn the Temperature Control Dial to Off ( O )....
Ce manuel est également adapté pour les modèles :Fers - 169073 (198.71 kb)