Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
Do not leave iron unattended while connected or on an ironing board. 9. Burns can occur from touching hot metal parts, hot water, or steam. Hot water may leak from the iron. Use caution when filling or turning the steam iron upside down. 10. To protect against burns or injury to persons, do not direct steam toward the body when ironing or self-cleaning. 11. The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable. SPECIAL INSTRUCTIONS" To reduce the risk of electric shock or fire: 1. Do not operate another high wattage appliance on the same circuit, to avoid a circuit overload. 2. If an extension cord is absolutely necessary, use a cord rated a minimum of 10 amperes. Cords rated for less amperage may overheat, and should not be used. Care should be taken to arrange the cord so that it can not be accidentally pulled or tripped over. To reduce the risk of personal injury and damage to your iron: A CAUTION AWARNING -3- 1. Never use steam iron cleaning products in the iron, as they may damage working parts of the iron. 2. Do not use water additives or substitute water such as linen or scented water in the steam iron. They can stain fabrics. 3. If the Steam/Dry Selector is not at Dry position after using, remaining water will move into the Soleplate and can result in burns at the next use of the iron._ SAVE THESE INSTRUCTIONS For proper use of your iron, read remaining safety cautions and operation instructions._ COMPONENTS IDENTIFICATION Warning Instruction Please read warning before use. AC Power Cord Dry Low Steam Hiah Steam Water Fill Opening Cord Wind Button -Heel Rest Cord Reel Unit Jet of Steam Button / Vertical Steam Button Spray Mist Button — Steam/Dry Selector - Handle Spray Nozzle ■ MAX " Line Thermostat Operating Indicator Light Soleplate- Detachable Water Tank- Select Indicator Identification Plate -Temperature Selector Dial -4- INSTRUCTIONS FOR THE PROPER USE OF THE RETRACTABLE POWER CORD [ Please see Warning on page 2-~3~] (1) Unwind the Power Cord far enough to plug Into a wall outlet, allowing enough length to operate the iron. (2) If the Power Cord seems hard to unwind due to improper winding, pull firmly until it is released. (3) When retracting the Power Cord, always hold the Plug with one hand while pressing the Cord Wind Button with the other hand, and retract the cord slowly. (4) If the Cord does not retract completely, pull it out slightly and wind it again while guiding it into the reel. READ THIS INSTRUCTION BOOK THOROUGHLY BEFORE USING YOUR Panasonic IRON TO BECOME FAMILIAR WITH THE IRON FEATURES HELPFUL IRONING TIPS The Temperature Selector Dial of the Panasonic iron has numbers, dots and steam symbols. a) The numbers are indicated as 1 (lowest setting) through 6 (highest setting). For general information of the number settings, refer to the heel rest. For more detailed information, refer to page 12 of this instruction book. b) The dots are symbols for 3 temperature ranges: • Low Temperature •• Medium Temperature • •• High Temperature Some fabrics are labeled with these dots as a guide for selecting the proper ironing temperature setting. c) The steam symbols are used for selecting steam settings. For further details, refer to page 6-10 As a guide to the Fabric Care Symbols, the following symbols are printed for your information. Fabric Care Symbols Washing Bleaching Ironing Dry Cleaning A symbol crossed out indicates that the article of clothing must not be subjected to the particular treatment. EXAMPLE:(DO NOT BLEACH) ^ Before ironing, sort the garments according to the different heat settings required. Iron fabrics that require a lower temperature first. Do not touch plastic buttons with a hot iron because they may melt. Be careful around zippers and similar items to prevent the soleplate from scratching. -5- HOW TO FILL WITH WATER Make sure the iron is turned off and the AC Power Cord is unplugged from the electrical outlet. The iron can be filled with the Detachable Water Tank in place or removed. Confirm that the Steam /Dry Selector is set at the Dry ironing position (LEFT) when installing or removing the Tank. 1. When the iron is sitting up on the Heel Rest, press the Tank Lock/Release Button down and the Tank will be released. 2. Grasp the Tank and lift it off the iron. NOTE: Do not pull on or damage the rubber gasket that joins the main part of the iron with the Water Tank. Note: 3. Open the Water Fill Opening and fill the Tank up to the" MAX" Line on the Tank. To check the level of water, grasp the Tank vertically. 4. To re-install the Tank, set the Tank onto the main body and press into place until a click sound is heard. 5. The water level can be observed through the transparent part of the Tank, when iron is placed vertically. When the water level becomes low, refill the Tank, following the procedure describ...
Ce manuel est également adapté pour les modèles :Fers - NI-C55SR (3.22 mb)