Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
It has a large detachable water tank that can be refilled at any time without switching off the system. We hope that you enjoy ironing with this steam station. Important Open out the first page of the booklet, this will help you to understand how the appliance works. This appliance complies with international safety standards. This appliance has been designed exclusively for domestic use and must not be used for industrial purposes. This appliance must only be used only for the purposes for which it was designed, i.e. as an iron. Any other use will be considered improper and consequently dangerous. The manufacturer will not be held responsible for any damage arising from misuse or improper use. General safety instructions • This appliance is to be connected and used in accordance with the information stated on its characteristics plate. • This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A and has a socket with an earth connection. • The iron should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water. It must be checked by an authorized Technical Service Centre before it can be used again. • If the safety fuse fitted in the appliance blows, the appliance will be rendered inoperative. To restore normal operation the appliance will have to be taken to an authorised Technical Service Centre. • In order to avoid that, under unfavourable mains conditions, phenomena like transient voltage drops or lighting fluctuations can happen, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0.27 O . If necessary, the user can ask the public power supply company for the system impedance at the interface point. • This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use. • The appliance must never be placed directly under the tap to fill the water tank. • The appliance must be used and placed on a stable surface. • When placed on its stand, make sure that the surface on which the stand is placed is stable. • The iron must not be left unattended while it is connected to the supply mains. • Unplug the appliance from the mains supply after each use, or if a fault is suspected. • The electrical plug must not be removed from the socket by pulling the cable. • Never immerse the iron or steam tank in water or any other fluid. • Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.). • With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorised Technical Service Centre. Important : • This appliance reaches high temperatures and produces steam during use, this could cause scalds or burns in case of improper use. • The steam hose, base station and in particular the iron can get hot when used. • Never aim the steam at people or animals. • Do not allow the power cable to come into contact with the soleplate when it is hot. • Be aware that the system can keep on steaming a short additional time after releasing the steam trigger. This is a normal function. 11 en Description 1. Removable water tank 2. Removable iron pad 3. "Water empty" / "Clean warning" pilot light 4. "Steam ready” / "Auto shut-off” pilot light 5. Variable steam control 6. "Energy saving” button (depending on the model) 7. Steam hose 8. Illuminated main power 0/I button 9. Housing with internal steam generator 10. Mains plug 11. Mains cable with storage facility 12. Cord clip 13. Temperature dial 14. Iron pilot light 15. Iron steam release button 16. Soleplate Preparations (A) 1. Remove any label or protective covering from the soleplate. 2. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad from the appliance and place the iron on it on another solid, stable, horizontal surface. 3. Remove the detachable water tank (1) and fill it, making sure not to pass the level mark. 4. Fit the water tank back onto the steam tank. 5. Unwind the mains cable (11) fully and plug it into an earthed socket. 6. Set the main power button (8) to the "I” position. 7. The "Steam ready” indicator lamp (4) will light up after several minutes, indicating that the appliance is ready to use. The steam generator will take more time to reach "Steam ready” state only upon the initial heating up, or after performing t...