Évaluations - 2, GPA: 3.5
(
)
)
|
Facilité d'utilisation
If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Before first use 1 Remove any sticker, protective foil or plastic from the soleplate. 2 Rinse and dry the filling cup. Preparing for use Filling the water tank 1 Make sure the appliance is unplugged. 2 Set the steam control to position 0 (= no steam) (Fig. 2). 3| Open the cap of the filling opening. 4 Tilt the iron backwards and use the filling cup to fill the water tank with tap water up to the maximum (Fig. 3). Do not fill the water tank beyond the MAX indication. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. , If the tap water in your area is very hard, we advise you to mix it with an equal portion of distilled water, or to use distilled water only. 5 Close the cap of the filling opening (‘click') (Fig. 4). Setting the temperature 1 GC4444, GC4440 only: Remove the heat-resistant protective cover (Fig. 5). Do not leave the heat-resistant protective cover on the soleplate during ironing. 2 Put the iron on its heel. 3 To set the required ironing temperature, turn the temperature dial to the appropriate position (Fig. 6). Check the laundry care label for the required ironing temperature: - • for synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester) - • for silk - 2 for wool - • • • for cotton - MAX for linen If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches. To prevent stains, do not use the spray function. Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic fibres. 4 Put the mains plug in an earthed wall socket. 8 ENGLISH ► The amber temperature light goes on. S When the amber temperature light has gone out, wait a while before you start ironing. The temperature light goes on from time to time during ironing. Using the appliance Note: The iron may give off some smoke when you use it for the first time. This stops after a short while. Steam ironing 1 Make sure that there is enough water in the water tank. 2 Set the required ironing temperature (see chapter ‘Preparing for use', section ‘Setting the temperature). 3 Set the appropriate steam setting. Make sure that the steam setting you select is suitable for the set ironing temperature: (Fig. 7) - 1 - 3 for moderate steam (temperature settings 2 to •••) - 4 - 6 for strong steam (temperature settings 2* to MAX) Note: The iron starts to produce steam as soon as it reaches the set temperature. Note: If the set ironing temperature is too low (MIN to 2), water may drip from the soleplate (see chapter 'Features, section 'Drip stop’). Ironing with Ionic DeepSteam (GC...
Ce manuel est également adapté pour les modèles :Fers - GC4410 (1.17 mb)
Fers - GC4412 (1.17 mb)
Fers - GC4415 (1.17 mb)
Fers - GC4420 (1.17 mb)