Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
• Turn the steam/spray button (1) into position and blast out steam several times by pressing the steam/spray button. • When all the steam has escaped, the iron is ready to operate. OPERATION Dry Ironing • Fill the water tank as described below in Before First Use. For dry ironing, the water tank does not need to be filled with water. • To dry iron, set the steam selection switch to position 0. • Connect the power plug to a suitable socket and turn the temperature regulator clockwise to the desired temperature. The power indicator will light up. As soon as the desired temperature is reached the power indicator will turn off. If the steam iron has cooled down too much, the power indicator will light up again to indicate that the iron is heating up again. GB GBGB Settings: 0 = OFF • = Nylon, Silk • • = Wool ••• = Cotton MAX = Linen, highest temperature • Before selecting the temperature, the apparel label. • Note: If there are no care instructions, you temperature level. Less steam is produced Caution: Synthetic fibres may melt. • Iron the piece of clothing. • To turn off the appliance, set the temperature regulator selection button to the 0 position. Place the iron in an upright position and unplug the appliance. Steam ironing • Steam ironing can be used in the temperature ranges ••• MAX. Do not use other temperature levels due to the fact that water can from the iron base. • Fill water into the water tank as described below in Before First Use. For reliable functioning of the steam iron, the water tank should be filled with enough water at all times. • Select the desired amount of steam with the steam selection switch. In the position the amount of steam is the highest. Always keep the iron in a horizontal position. • For an extra blast of steam press the steam/spray button in the position. The steaming function should be used at the highest temperature level only. To avoid dripping water from the iron base, wait at least 1 minute between every blast of steam. Spray function: • Turn the steam/spray button into the position and then press the button to moisten the spot to be ironed. Water escapes from the spray nozzle (4) . Vertical steam ironing: • Hold the iron in a vertical position about 15 to 30 cm away from the clothes. To remove wrinkles on hanging apparel, curtains, or any other fabrics, simply press the steam/spray button in the position to blast out steam. • Warning! The steaming temperature is very high. Do not use steam on apparel or fabrics while there are being worn by humans or pets. Turning off the iron: • To turn off the appliance, set the temperature regulator and steaming selection switch to position 0 and unplug the power plug. • Before draining the water, let the appliance cool down completely. Burn hazard! • Open the lid of the water fill-in opening, place the iron upside down, and carefully drain the remaining water while shaking the appliance carefully. • Press the steam/spray button to let the remaining water drain easily. 9 10 GB GBGB CLEANING MAINTENANCE • Be sure to read • To dry the iron, drain to position MAX for a short time while • Turn the iron off as described. • Make sure that the plug is to cool down completely. • Clean the outside of the iron with use a mild detergent. • Do not use abrasive detergents or hard • Wipe the iron base with a damp cloth. • Make sure to clean the water tank, as described from time to time. Fill the water tank with water and then shake Drain the water to remove possible residue. • If the iron is to be stored, always allow it to cool down Wrap up the power cord. Keep the iron in a safe place out of • Dry the appliance before plugging it in. • Store the iron in the original packaging. To avoid damages, do not wrap the power cord around the iron. Self-cleaning system • This iron should not be cleaned with decalcified solvents. • The self-cleaning system should be used once a month to remove chalk residue. If hard water is used, you should repeat this measure more often. • Fill the water tank until it is half full. • Place the iron vertically on a flat surface and connect the appliance with the power source. • Set the temperature regulator to MAX and wait until the power indicator turns off. Turn the temperature regulator back to MIN and unplug the appliance. • Hold the iron horizontally over a basin and turn the steam selection switch to position . The switch will lift up a little bit. • Turn the steam/spray button to position then press it. In doing so, swing the iron slightly. Repeat these steps if the calcification remains too prevalent. • Clean the iron base after the self-cleaning process. Be sure to let the device cool down completely before cleaning. • Decalcifying the steam selection switch mechanism: If the steam selection switch is in the position , the bar can be removed easily by pulling it upwards. Remove the bar and put it into a customary decalcifying solvent over night. GB GBGB INSTRUCTIONS Do not dispose at the end of its life the r...
Ce manuel est également adapté pour les modèles :Fers - 0709 (660.29 kb)