|
Photos et spécifications Philips GC526/05 |
Facilité d'utilisation
Filling the water tank Note:You can use normal tap water. If the tap water in your area is very hard, we advise you to mix it with an equal amount of distilled water. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. Do not fill the water tank beyond the MAX indication. Note: Always empty the water tank before you refill it. 1 Open the cap of the filling opening. 2 Fill the water tank up to the MAX level with the filling cup supplied (Fig. 2). 3 Close the cap of the filling opening (‘click’). Note:You can refill the water tank at any time. Always unplug the appliance before you start to refill the water tank. Using the appliance -Make sure the water level in the water tank is above the MIN level at all times. -To prevent the hose from forming a U-shape, always place the steamer on the floor to ensure that the hose is straight. If you hear an excessive croaking sound or if the steam output is irregular, lift the steamer head from time to time to straighten the hose. This allows any condensation to flow back into the water tank (Fig. 3). -When you use the steamer, steam condenses inside the hose. When the hose forms a U-shape, this condensation cannot flow back into the water tank and causes a croaking sound and irregular steam output.To prevent this as much as possible, always place the steamer on the floor to ensure that the hose is straight. If you hear an excessive croaking sound or if the steam output is irregular, lift the steamer head from time to time to straighten the hose. This allows any condensation to flow back into the water tank (Fig. 4). EnGliSh 1 2 Put the mains plug in an earthed wall socket (Fig. 5). Press the on/off button on top of the appliance to switch on the appliance (Fig. 6). -GC515/GC511/GC510: The on/off button lights up. -GC526/GC525/GC520: The steam button for high steam output lights up. 3 Let the water in the steam tank heat up.This takes approximately 2 minutes. -GC515/GC511/GC510: When the water in the water tank is ready for steaming, steam comes out of the steamer head. -GC526/GC525/GC520: Press the appropriate steam button to select the desired steam output (single cloud = low steam output, double cloud = high steam output) (Fig. 7). Steaming garments Never direct the steam at people. Do not touch the steamer head nozzle while you are steaming. Keep it at a distance of at least 20cm from your body to prevent scalding. Note:The steam supply hose becomes warm during steaming.This is normal. Recommended ways to remove creases: -Front of the collar : (Fig. 8) Hold one tip of the collar with one hand. With the other hand, move the steamer head to and fro as shown by the arrows in the figure. -Back of the collar : (Fig. 9) Pull down the collar and hold one tip of the collar with one hand. With the other hand, move the steamer head to and fro as shown by the arrows in the figure. -Front: (Fig. 10) Move the steamer head up and down as shown by the arrows in the figure. -Pocket: (Fig. 11) Hold the front of the garment with one hand. Move the steamer head upwards as shown by the arrow in the figure. -Back of the garment: (Fig. 12) Move the steamer head up and down as shown by the arrows in the figure. -Sleeve: (Fig. 13) Hold the cuff of the sleeve with one hand. With the other hand, move the steamer head to and fro as shown by the arrows in the figure. Steamer head holder (GC520/GC511/GC510 only) You can use the steamer head holder to hang the steamer head on when you have to stop steaming for a moment, e.g. when you have to turn around the piece of clothing you are steaming. Hang the steamer head holder somewhere within reach of the garment you are steaming, for example on a garment rack. Glove (GC526/GC525/GC520/GC511 only) Put the glove on the hand you are using to hold a garment. The glove protects your hand against the steam from the steamer head. hanging accessory (GC526/GC525/GC515 only) The steamer comes with a hanging accessor y on which you can place your steamer, hang the garment for steaming, or hang the steamer head whenever you need to pause. Note: Position the hanging accessory with the steamer in the right direction (Fig. 14). Caution: Make sure the steamer is positioned in such a way that the supply hose connection points away from you and the supply hose does not get in the way. (Fig. 15) EnGliSh Emptying the water tank after use Always empty the water tank after use. 1 Press the on/off button to switch off the appliance (Fig. 16). Note: It is normal that steam continues to come out of the steamer head for approx. 5 seconds after you switch off the appliance. Remove the mains plug from the wall socket (Fig. 17). Let the appliance cool down for at least 5 minutes. Turn the cap of the drainage opening to the ‘unlocked’ position and empty the water tank 2 3 4 into the sink (Fig. 18). Note:The cap of the drainage opening cannot be removed from the water tank. 5 Turn the cap of the drainage opening to the ‘locked’...
Ce manuel est également adapté pour les modèles :Fers - GC515/25 (1.41 mb)
Fers - GC515/05 (1.41 mb)