Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 1.13 mb Nom Fichier : Langue d'enseignement:

5 Types GC6268/GC6265/GC6068/GC6065/GC6029 only: as soon as the water in the steam tank is hot enough for steam ironing, the pilot light (E) will go out.You can now start ironing. Tips . If the fabric consists of various kinds of fibres, always select the temperature required by the most delicate fibre, i.e. the lowest temperature. For example: if an article consists of 60% polyester and 40% cotton, it should be ironed at the temperature indicated for polyester (1) and without steam. . When steam ironing woollen fabrics, shiny patches may occur.You can prevent this by using a dry pressing cloth or by turning the article inside out and ironing the reverse side. . Velvet and other fabrics that tend to acquire shiny patches should be ironed in one direction only (along with the nap) while applying very little pressure. 10 ENGLISH . Do not use steam when you are ironing coloured silk. This could cause stains. C C Steam ironing Make sure that there is enough water in the steam tank. . Steam ironing is only possible at higher ironing temperatures (temperature settings 2 to MAX). 1 Set the temperature dial to the recommended position. See 'Setting the temperature'. Wait until the 'steam tank heating up' pilot light has gone out. Keep the steam activator button (H) pressed in while you are steam ironing. 2 3 Types GC6268/GC6265/GC6068/GC6065/GC6029 only: During steam ironing, pilot light G will go on from time to time to indicate that the steam tank and the iron are being heated up to the right temperature and pressure.You can simply continue ironing while this happens. If you have not used the steaming facility for some time, the steam that was still present in the supply hose will have condensed into water. When you star t steam ironing again, this may cause some spluttering in the appliance and a few droplets of water may escape from the soleplate. B To prevent droplets from falling onto your garments, hold the iron over an old cloth and press the steam activator button (H) until the steam production has normalised before you start steam ironing again. Ironing without steam 1 Set the temperature dial to the recommended position. See 'Setting the temperature'. 2 Do not press the steam activator button (H). . Some steam will escape if you press the steam activator button by accident while you are ironing. If the steam tank is empty or has not heated up yet, you will hear a clicking sound inside the tank. This phenomenon is caused by the opening of the steam valve and is perfectly harmless. C C C ENGLISH 11 . If you have been ironing at a high temperature and subsequently set the temperature dial (I) to a lower setting, wait until the temperature pilot light (G) goes on again before you continue ironing.This will prevent damage to your fabrics. Other features Steaming in vertical position 1 Hanging curtains and clothes (jackets, suits, coats) can be steam ironed by holding the iron in vertical position. Never direct the steam at people. Shot of steam (ty...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :