Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Children should be super vised to ensure that they do not play with the appliance. The appliance must be used and placed on a stable surface. When placed in a support, make sure that the surface on which the support stands is stable. The iron should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water. It must be checked by an authorized Technical Service Centre before it can be used again. Remove the plug form the socket before filling the appliance with water or before pouring out the remaining water after use. Never immerse the iron in water or any other fluid. The appliance must never be placed under the tap to fill the water. Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.) The electrical plug must not be removed from the socket by pulling the cable. Unplug the appliance form the mains supply after each use, or if a fault is suspected. With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorised Technical Ser vice Centre. Unplug the iron from the mains supply when you have to leave the iron unattended. IMPORTANT WARNINGS Do not allow the power cord to come into contact with the soleplate when it is hot. Store the iron in upright position. Do not use descaling agents (unless they have been advised by UFESA), they can damage the appliance. Never use abrasive products to clean the soleplate or any other part of the appliance. To keep the soleplate smooth, you should avoid hard contact with metal objects. Never use a scouring pad, or chemicals to clean the soleplate. DIGITALLY CONTROLLED ELECTRONIC IRON The digitally controlled electronic irons do not have a temperature control knob, however they are equipped with a display screen and a navigation key ( / SEL) The display screen comprises of several icons that indicate the status of the iron OFF Indicates that the iron is switched off on stand-by state . SILK Indicates that the selected ironing temperature is suitable for silk and synthetic fabrics .. WOOL Indicates that the selected ironing temperature is suitable for wool ... COTTON Indicates that the selected ironing temperature is suitable for cotton MA X LINEN Indicates that the selected ironing temperature is suitable for linen Indicates (flashing) that the steam option is ready for use. ^ Indicates (flashing) that sole plate temperature is rising up Ў Indicates (flashing) that sole temperature is decreasing Indicates (flashing) the chosen option. The iron is ver y simple to use: When it is plugged in, the display screen lights up and then the iron goes into stand-by «OFF» state. To switch it on, just press the navigation key ( / SEL) once. The iron switches to the lowest temperature level (. SILK) To change the selected temperature just press the navigation key repeatedly. The iron goes through the following cycle: OFF . SILK .. WOOL ... COTTON MAX LINEN OFF The iron is ready for use with steam as soon as the icon appears, assuming there is water in the tank. This function cannot be used unless the icon is on. BEFORE USING THE IRON FOR THE FIRST TIME Remove any label or protective cover from the soleplate. With the iron unplugged, fill in the tank of the iron with tap water. Plug in the appliance to the mains, place the iron upright leant on its suppor t and set the temperature «M A X LINEN » When the steam iron has reached the desired temperature (flashing icon ^ will disappear), start steaming by setting the steam regulator to «MA X» and by repeatedly pressing the steam button When using the steam function for the first time, do not apply it on the laundr y, as there could still be dirt in the steam dispenser. Your new iron may smell and give off some smoke when you use it for the first time, this is normal and will cease after a short while. HOW TO USE THE IRON «^» icon blinks while the iron is in process of heating up, and dissapears as soon as the desired temperature is reached. Now you can start ironing «Ў» icon blinks while the iron is in process of cooling down, and dissapears as soon as the desired temperature is reached (it could take several minutes to go from a higher temperature to a lower one) Check the laundr y care label for the required ironing temperature. If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic fibres. Silk, woollen or synthetic materials: iron the reverse side of the fabric to prevent shiny patches. Avoid using the spray function to prevent stains. FILLING THE WATER TANK 1 Set the steam regulator to the position and unplug the iron from the mains! Use only clean water from the tap without mixing anything with it. The ad...
Ce manuel est également adapté pour les modèles :Fers - PV1535(00) (2.27 mb)
Fers - PV1535/01 (2.27 mb)