Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Never use abrasive products to clean the soleplate or any other part of the appliance. To keep the soleplate smooth, you should avoid hard contact with metal objects. Never use a scouring pad, or chemicals to clean the soleplate. Before using the iron for the first time With the iron unplugged, fill in the tank of the iron with tap water and set the temperature dial to “max” Plug in the appliance to the mains. When the steam iron has reached the desired temperature (pilot light switches off), start steaming by setting the steam regulator to “2” and by repeatedly pressing the button . When using the steam function for the first time, do not apply it on the laundry, as there could still be dirt in the steam dispenser. Your new iron may smell and give off some smoke when you use it for the first time, this is normal and will cease after a short while. How to use the iron Check the laundry care label for the required ironing temperature. If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic fibres. Silk, woollen or synthetic materials: iron the reverse side of the fabric to prevent shiny patches. Avoid using the spray function to prevent stains. • Synthetics •• Silk – Wool ••• Cotton – Linen Filling the water tank Set the steam regulator to the “0”position and unplug the iron from the mains! Use only clean water from the tap without mixing anything with it. The addition of other liquids, such as perfume, will damage the appliance. Any damage caused by the use of the aforementioned products, will make the guarantee void. Do not use condensation water from tumble dryers, air conditionings or similar. This appliance has been designed to use normal tap water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. Never fill beyond the “max” water level mark. Getting ready 1 Remove any label or protective cover from the soleplate. Ironing without steam 2 Ironing with steam 3 Only when the temperature dial is placed in the areas with the steam symbol. Get extra steam by pressing the steam regulator for maximum 2 seconds. Spray 4 Do not use the spray function with silk. Shot of steam 5 Set the temperature dial in the max position Interval between shots of steam should be 5 sec. Vertical steam 6 Do not iron clothing while it is being worn! Never direct the steam at persons or animals! Interval between shots should be 5 sec. Wait 10 sec. after a cycle of 4 shot. Multiple descaling system 7 Depending on the model, this range is equipped with the “AntiCalc” (=component 1 + 2 + 3) descaling system. 1. self-clean Each time you use the steam regulator, the “self-clean” system cleans the mechanism of scale deposits. 2. Ca...
Ce manuel est également adapté pour les modèles :Fers - TDA2610/02 (1.85 mb)
Fers - TDA2610/03 (1.85 mb)
Fers - TDA2610/04 (1.85 mb)
Fers - TDA2610/05 (1.85 mb)